791714
111
Zoom out
Zoom in
Previous page
1/131
Next page
December 2020 104 Cap. 7: CONNECTING TO EXTERNAL DEVICES
For information about JESS technology, developed by JULTEC, refer to its
website ( http://jultec.de/).
1 Connect the RF cable to the RF connector for the input signal of the
equipment.
2 Press the Spectrum key to access the spectrum analyzer mode.
3 Press the Settings key and select the satellite band. From the Settings menu,
select the polarization (horizontal/vertical) and the satellite band (high/low).
4 If necessary, enable the Supply output and select the supply voltage for the
LNB.
5 In the option SCD2/EN50607, select ON to enable it. It appears the JESS icon
at the top right corner of the screen.
6 Now the SCD2/EN50607 option shows a new menu. Select Configuration to
access the configuration parameters. The user can select the power, central
frequency, tone beacon and satellite for each band. The user can also select
the number of user bands and the available satellites through the option
"Configuration" on key .
NOTE: When tuning by channel is selected, polarization, satellite band and
supply output cannot be changed, because these parameters are
determined by the channel plan.
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PROmax HD Ranger Ultralite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PROmax HD Ranger Ultralite in the language / languages: English as an attachment in your email.

The manual is 6.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info