Manual Proline POM567SS (page 48 of 76) (English, Dutch, French)

654313

Zoom out

Zoom in

1/76

Rotisserie

Pull out the clamps on the spit by

loosening their screws and stick the spit

into chicken. Then, mount the clamps by

sliding them on the spit and stick the

clamps into chicken. Tighten their

screws. Before roasting make sure the

oven and rotisserie functions are turned

OFF. Put the tray on second shelf and

locate the rotisserie bearing bracket for

spit in the holes on the tray as shown in

the picture. Some products may have

rotisserie bearing grid accessory instead

of the rotisserie bearing bracket.

In this case, you only need to place the bearing grid on third shelf.

Place the point tip of spit into hole at back panel of oven and the bearing of the spit on the

rotisserie bearing bracket or rotisserie bearing grid. Also, be sure that the tip of the spit is

placed into the hole correctly. During rotisserie, the spit handle must never be mounted and

the oven door must be closed.

NOTE: The maximum weight the spit will withstand is 4.0Kg.

Spit

Rotisserie bearing

bracket or rotisserie

bearing grid

Tray

Spit handle

Spit hole on back

panel of oven

Pan anti-tilting wire

To locate grid correctly in the cavity, put it to any rack

and push the grid fully home.

The pan anti-tilting wire must be placed inside of the

cavity.

Removal of catalitic panel

Remove G screws on

each catalitic

enamel coated panel.

Downloaded from www.vandenborre.be

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline POM567SS in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline POM567SS Manual

Product: