495810
8
Zoom out
Zoom in
Previous page
1/85
Next page
Downloaded from www.vandenborre.be
7
Remove and refit the blanking plugs on the
middle of the steel plate from right to left side.
Remove the door hinge cap in the top of the lower
door and insert it on the opposite side of the door.
Replace the central hinge after refitting the lower
door; do not fully tighten the hinge screws to
make the final adjustments.
Unscrew the hinge pin from the top hinge using Refit the top hinge while refitting the upper
door.
the spanner. Turn the hinge over and replace it Do not fully tighten the screws.
in the same slot (reversed).
Check that doors are aligned horizontally and vertically and that all seals make good contact with the
cavity all the way around the cavity opening before finally tightening the hinges. Refit the plastic insert
on the top cover from left to right side before refitting the top cover. Re-adjust the levelling feet if
necessary.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proline PLC 280W-F-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proline PLC 280W-F-1 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info