Manual Proline PLC 102 (page 11 of 36) (English, German, Dutch, French)

495822

Zoom out

Zoom in

1/36

Downloaded from www.vandenborre.be

Warning! Any electrical component

(power cord, plug, compressor) must

be replaced by a certified service agent

or qualified service personnel to avoid

hazard.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not

squashed or damaged by the back

of the appliance. A squashed or

damaged power plug may overheat

and cause a fire.

3. Make sure that you can come to the

mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do

not insert the power plug. There is a

risk of electric shock or fire.

6. You must not operate the appliance

without the lamp cover (if foreseen) of

interior lighting.

• This appliance is heavy. Care should be

taken when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are

damp/wet, as this could cause skin abra-

sions or frost/freezer burns.

• Avoid prolonged exposure of the appli-

ance to direct sunlight.

• Bulb lamps (if foreseen) used in this appli-

ance are special purpose lamps selected

for household appliances use only. They

are not suitable for household room illu-

mination.

Daily Use

• Do not put hot pot on the plastic parts in

the appliance.

• Do not store flammable gas and liquid in

the appliance, because they may ex-

plode.

• Do not place food products directly

against the air outlet on the rear wall. (If

the appliance is Frost Free)

• Frozen food must not be re-frozen once

it has been thawed out.

• Store pre-packed frozen food in accord-

ance with the frozen food manufacturer's

instructions.

• Appliance's manufacturers storage rec-

ommendations should be strictly adhered

to. Refer to relevant instructions.

• Do not place carbonated or fizzy drinks in

the freezer compartment as it creates

pressure on the container, which may

cause it to explode, resulting in damage

to the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from

the mains socket.

• Do not clean the appliance with metal

objects.

• Do not use sharp objects to remove frost

from the appliance. Use a plastic scraper.

Installation

Important! For electrical connection

carefully follow the instructions given in

specific paragraph.

• Unpack the appliance and check if there

are damages on it. Do not connect the

appliance if it is damaged. Report possi-

ble damages immediately to the place

you bought it. In that case retain packing.

• It is advisable to wait at least four hours

before connecting the appliance to allow

the oil to flow back in the compressor.

• Adequate air circulation should be

around the appliance, lacking this leads

to overheating. To achieve sufficient ven-

tilation follow the instructions relevant to

installation.

• The appliance must not be located close

to radiators or cookers.

• Make sure that the mains plug is accessi-

ble after the installation of the appliance.

Service

• Any electrical work required to do the

servicing of the appliance should be car-

ried out by a qualified electrician or com-

petent person.

• This product must be serviced by an au-

thorized Service Centre, and only genu-

ine spare parts must be used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline PLC 102 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline PLC 102 Manual

Product: