Downloaded from www.vandenborre.be
EN -15-
• Remove the bottom door
(10)
by lifting it slightly; Place the door in a safe location so it
does not get damaged.
• Remove the bottom door hinge pin
(18)
from the bottom bracket and reposition into the
opposite bracket.
• Replace the bottom door
(10)
onto the repositioned hinge pin and close the door onto the
refrigerators cabinet.
• Turn over the middle door hinge
(12)
and x to the bottom door and fasten the bracket with
only two of the 4 screws into the top holes.
• Attach the cabinet xing bracket to the remaining two holes through the middle hinge
and fasten. Replace the hole blanking plugs
(17)
into the remaining holes.
• Fasten the opposite cabinet xing bracket
(13)
to the other side using the bottom holes.
• Replace the top door onto the middle hinge and close the door onto the refrigerators
cabinet.
• Insert the top hinge pin into the top door.
• Fasten the top hinge with two screws and ensure the doors close correctly and are level.
TROUBLESHOOTING:
Before calling for service please check the following points.
The freezer is not working
• Check the plug is inserted correctly into the mains outlet socket.
• Check there is power to the mains outlet socket by plugging in another appliance, if the
other appliance works check the fuse in the freezer plug.
The freezer is noisy when running
• Check the freezer is level and it is not in contact with another appliance or kitchen
furniture.
Thefreezerdoesnotcoolsufciently
• If the door has been opened too often, or it has been left open for a while it will take time
for the freezer to reach its set temperature.
• Check the airow over the rear of the freezer has not been reduced due to insufcient
clearance.
• If a large quantity of fresh food has been introduced
If there is water in the lower part of the refrigerator:
Check if:
• The drain hole at the back of the refrigerator is blocked use the defrost drain plug to
unblock the hole.
