Manual Proline PBI 47 FULL (page 58 of 97) (English, Dutch, French)

654254

Zoom out

Zoom in

1/97

Cleaning the Spray Arms

The spray arms can be easily removed for periodic cleaning

of the nozzles, to prevent possible clogging.

To remove the upper and lower spray arms, hold and

unscrew or pull them out.

Wash the spray arms under running water and attach them

back in place, checking that the rotary movement is in no

way impeded.

Frost Precautions

Avoid placing the dishwasher in a location where the temperature is below 0°C. If this is

unavoidable, empty the dishwasher, close the door, disconnect the water inlet pipe and

empty it.

TROUBLESHOOTING

Problem

Possible Causes

Solutions

Dishwasher

will not start.

Fuse blown, or the

circuit breaker

tripped

Replace fuse or reset circuit breaker.

Remove any other appliance sharing the

same circuit with the dishwasher.

Power supply is not

turned on.

Make sure the dishwasher is turned on

and the door is closed securely.

Make sure the power cord is properly

plugged into the wall socket.

The door has not

been properly

closed.

Close the door securely.

Water not

pumped from

dishwasher

Kink in drain hose

Check drain hose.

Filter clogged

Check the filters (see “Cleaning the Filter

Unit”).

Kitchen sink clogged

Check kitchen sink to make sure it is

draining well. If kitchen sink is not

draining, you may ask a plumber to

check it.

Suds in the tub

Improper detergent

Use only the detergent special for

dishwasher to avoid suds. If this occurs,

open the door and let the suds

evaporate. Close the door securely then

start the soak wash cycle to drain the

water out. Repeat if necessary.

Spilled rinse aid

Always wipe up rinse aid spills

OpenOpen

Downloaded from www.vandenborre.be

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline PBI 47 FULL in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 10,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline PBI 47 FULL Manual

Product: