654472

Proline FS20 Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
BEFORE FIRST USE
Before using your food slicer for the first time, clean the surfaces in contact with foods (see the
CLEANING AND MAINTENANCE section).
WARNING: Handle blades carefully. Failure to do so can result in cuts.
OPERATION
The food slicer can let you slice everything from paper-thin pepperoni to perfect servings of roast beef.
1. Place the food slicer on a flat stable surface.
2. Apply downward pressure onto the slicer, ensuring it is pressed firmly to the bench to activate the
suction feet.
3. Place the food to be sliced on the carriage with the safety food holder in place, ensuring that the
safety food holder holds the food firmly in place.
4. Select the desired slicing thickness by turning the thickness control knob (0mm to 13mm).
5. Plug the food slicer into the mains socket.
Check that the switch is turned off before plugging in the appliance.
6. Turn on the food slicer.
7. To slice, grasp the food guide firmly whilst holding the safety food holder and then smoothly slide
the carriage back and forth in an even and steady motion.
Important: Do not operate this appliance without the sliding food guide and safety food holder in
place.
To ensure even slicing, do not press the food against the blade too firmly.
Check desired thickness and adjust the thickness control knob accordingly.
8. After the slicing is finished, turn off and unplug the slicer from the mains socket.
Do not operate the appliance for more than 5 minutes without interruption. Allow it to
cool down before continuing operation.
Tips for best slicing results:
To slice meats wafer thin, freeze thoroughly for only 2 to 4 hours before slicing.
Meats should be boneless. Fruit should be free of seeds.
Foods with an uneven texture, like fish and thin steaks, are often difficult to slice. Freeze for 2
to 4 hours before slicing.
4
Downloaded from www.vandenborre.be
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proline FS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proline FS20 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info