730434
37
Zoom out
Zoom in
Previous page
1/59
Next page
GB
The overheating cut-out will shut off the tumble dryer if the temperature
is too high, e.g. because dust is clogging the filter.
The drying process goes on too long.
Check that
- You have selected the correct programme for fabric type.
- Air inlet and outlet are not blocked.
- Clothes are not excessively wet.
- The dryer is not overloaded.
The clothes are creased.
Check that the laundry is not overloaded. Use the anti-crease function.
Error messages
The indicator light
The indicator lights
The indicator light
Over temperature
Temperature
sensor error
NTC or PCB fault
Temperature sensor
is open or A/D
reading under 10.
Temperature sensor
is short or A/D
reading over 1000.
Error
Indication
Error
Description
Possible Cause Possible Solution
Min
is flashing.
Min
and
are flashing.
Max
is flashing.
Stop the
programme
and contact a
qualified
service agent.
Also, allow the dryer to cool for at least 10 minutes. To reset, press the
button at the rear of the dryer until a click is heard.
This cut-out only operates if the air flow is severely restricted so before
resetting, make sure the filter is clean and the air inlet and outlet are not
blocked.
The garments have shrunk.
To avoid shrinkage, please follow the care and use instructions for your
garment, as some fabrics shrink naturally when washed and other fabrics
should not be placed in a dryer.
37
Downloaded from www.vandenborre.be
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proline DVE7P-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proline DVE7P-1 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info