Manual Proline CDEP70-E (page 40 of 60) (English, Dutch, French)

474784

Zoom out

Zoom in

1/60

Delicate

Cotton

Cotton Cycle: to be used for cotton.

Synthetics

Synthetics Cycle: to be used for synthetic

or delicate items.

Delicate

Pressing this button allows drying to be

performed at a lower temperature, for deli-

cate items. The corresponding pilot light

comes on. This option can also be used for

time controlled drying.

Starting the programme

Press

Start/Pause button to start the

dryer after having selected the programme

and the options. The relevant light will stop

flashing. If the programme selector dial is

turned to another position, when the ma-

chine is running, the buzzer will sound and

the programme phase indicator lights will

flash. The drum turns alternately in both di-

rections during drying.

All drying programmes end with a 10 mi-

nute cooling phase. You may remove the

laundry after this phase.

If the door of the appliance or the small

door at the bottom is opened while the pro-

gramme is running, this button must be

pressed again after closing the door in or-

der to restart the programme from the point

at which it was interrupted. This button

must be depressed also after a power fail-

ure and after having reinserted the water

reservoir, if it has been emptied in the mid-

dle of a programme after lighting up of light

Water reservoir.

In both cases the light of the

Start/

Pause button flashes to remind you that the

start button needs to be pressed again.

Indicator lights

These lights indicate the following functions:

•

Drying light: This light indicates that

the appliance is in the drying phase.

•

End of programme light: This

light is on at the end of the cooling

phase, during the anticreasing phase and

at the end of the programme.

•

Water reservoir light: This light indi-

cates that the appliance is in the drying

phase. This light comes on at the end of

the programme to remind you that the

water reservoir must be emptied out. If

this light illuminates during a programme

this means that the water reservoir is full.

The buzzer sounds, the programme

stops, the light of the

Start/Pause but-

ton flashes. This light comes on also

when the water reservoir is not inserted

correctly.

•

Filter light: This light illuminates at the

end of the programme to remind you that

the filters must be cleaned.

•

Condenser light: It comes on every 80

cycles to remind you that the condenser

must be cleaned.

Changing programme

To change a programme which is running,

first cancel it by turning the programme se-

lector dial to

. Select the new pro-

gramme and press the

Start/Pause but-

ton.

At the end of the programme

If the laundry is not removed at the end of

the cycle, the dryer performs an anticreas-

ing phase (duration: 30 minutes maximum).

If you do not remove the laundry, the dryer

will stop automatically at the end of the an-

ticreasing phase. Lights

End of

programme,

Filter and Water reser-

voir remain lit and the buzzer sounds for 2

minutes.

Turn the programme selector dial to

switch the machine off. Remove the laundry

from the drum and carefully check that the

drum is empty.

If you do not intend to carry out another

wash, close the water tap. Leave the door

open to prevent the formation of mildew

and unpleasant smells.

If you open and then close the door

before turning the selector dial to

all

the lights corresponding to the phases

making up the performed programme

come on.

After each use

• Clean the filters.

• Empty the water reservoir.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline CDEP70-E in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 18,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline CDEP70-E Manual

Product: