Manual Proline CDEP70-E (page 34 of 60) (English, Dutch, French)

474784

Zoom out

Zoom in

1/60

tainer at the community waste disposal fa-

cilities.

Environmental tips

• In the dryer, laundry becomes fluffy and

soft. Fabric softeners are not therefore

needed when washing.

• Your dryer will function most economical-

ly if you:

– always keep the ventilation slots on the

base of the dryer unobstructed;

– use the loading volumes specified in

the programme overview;

– ensure you have good ventilation in the

installation room;

– clean the filter after each drying cycle;

– spin the laundry well before drying.

Energy consumption depends on spin-

ning speed set in washing machine.

Higher spinning speed - lower energy

consumption.

Installation

Appliance positioning

• It is recommended that, for your conven-

ience, the machine is positioned close to

your washing machine.

• The tumble dryer must be installed in a

clean place, where dirt does not build up.

• Air must be able to circulate freely all

round the appliance. Do not obstruct the

front ventilation grille or the air intake

grilles at the back of the machine.

• To keep vibration and noise to a mini-

mum when the dryer is in use, it should

be placed on a firm, level surface.

• Once in its permanent operating position,

check that the dryer is absolutely level

with the aid of a spirit level. If it is not,

raise or lower the feet until it is.

• The feet must never be removed. Do not

restrict the floor clearance through deep-

pile carpets, strips of wood or similar.

This might cause heat built-up which

would interfere with the operation of the

appliance.

Important! The hot air emitted by the

tumble dryer can reach temperatures of up

to 60°C. The appliance must therefore not

be installed on floors which are not resistant

to high temperatures.

When operating the tumble dryer, the room

temperature must not be lower than +5°C

and higher than +35°C, as it may affect the

performance of the appliance.

Warning! Should the appliance be

moved, it must be transported

vertically.

Warning! The appliance must not be

installed behind the lockable door, a

sliding door or a door with a hinge on

the opposite side to that of the

appliance.

The feet must never be removed. Do not

restrict the floor clearance through deep-

pile carpets, strips of wood or similar. This

might cause heat build-up which would in-

terfere with the operation of the tumble dry-

er in such a way that the full opening of the

tumble dryer door is not restricted.

Ensure min. 5cm free space around the ap-

pliance.

Removing transport safety packaging

Caution!

Before use all the transport packaging must

be removed.

1. Open loading door

2. Pull off adhesive strips from inside ma-

chine on top of drum.

3. Remove foil hose and polystyrene pad-

ding from the machine.

Electrical connection

Details on mains voltage, type of current

and the fuses required should be taken

from the type plate. The type plate is fitted

near the loading aperture (see “Product de-

scription” chapter).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proline CDEP70-E in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 18,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proline CDEP70-E Manual

Product: