490728
52
Zoom out
Zoom in
Previous page
1/64
Next page
Kontrolllampen
Programmende-Kontrolllampe. Leuchtet auf, wenn:
Das Spülprogramm beendet ist.
Sie die Wasserenthärterstufe einstellen.
Sie die akustischen Signalen aktivieren/deaktivieren.
Eine Fehlfunktion des Geräts auftritt.
Salz-Kontrolllampe. Leuchtet auf, wenn der Salzbehälter aufgefüllt werden
muss.
1)
Die Salz-Kontrolllampe kann nach dem Nachfüllen von Salz noch einige Stun-
den leuchten. Dies hat jedoch keine unerwünschte Auswirkung auf den Geräte-
betrieb.
1) Während eines laufenden Spülprogramms leuchtet die Kontrolllampe für Salz nie auf, auch wenn der Salzbehälter
leer ist.
Ein-/Aus-Taste
Drücken Sie diese Taste, um das Gerät ein-
und auszuschalten.
Programm-Kontrolllampen A und B
Diese Kontrolllampen haben noch eine Zu-
satzfunktion bei:
Der Einstellung des Wasserenthärters
Der Aktivierung/Deaktivierung der akusti-
schen Signale
Programmwahltaste
Mit dieser Taste können Sie:
Ein Spülprogramm wählen.
Die Wasserenthärterstufe einstellen.
Die akustischen Signale aktivieren/deakti-
vieren.
Ein laufendes Spülprogramm abbrechen.
Einstellmodus
Das Gerät muss sich für folgende
Funktionen im Einstellmodus befinden:
Zum Einstellen und Starten eines Spül-
programms
Zur elektronischen Einstellung der Was-
serenthärterstufe
Zur Aktivierung/Deaktivierung der akusti-
schen Signale
Schalten Sie das Gerät ein. Das Gerät
ist im Einstellmodus wenn:
Alle Programm-Kontrolllampen erloschen
sind.
Die Programmende-Kontrolllampe blinkt.
Schalten Sie das Gerät ein. Das Gerät
ist nicht im Einstellmodus wenn:
Nur eine Programm-Kontrolllampe leuch-
tet.
Brechen Sie das Programm ab, um in
den Einstellmodus zurückzukehren.
Siehe Kapitel „Auswählen und Starten
eines Spülprogramms“.
Signaltöne
Ein akustisches Signal ertönt, wenn:
Das Spülprogramm beendet ist.
Das Gerät eine Fehlfunktion aufweist.
Werkseitige Einstellung: Ein.
Deaktivierung der akustischen Signale:
1. Schalten Sie das Gerät ein.
2. Stellen Sie sicher, dass sich das Gerät
im Einstellmodus befindet.
3. Halten Sie die Programmwahltaste so
lange gedrückt, bis die Programm-Kon-
trolllampe (A) blinkt und die Programm-
Kontrolllampe (B) leuchtet.
4. Drücken Sie die Programmwahltaste so-
fort noch einmal.
Die Programm-Kontrolllampe (A) leuch-
tet und die Programm-Kontrolllampe (B)
blinkt.
Nach einigen Sekunden erlischt die Pro-
gramm-Kontrolllampe (A) und die Pro-
grammende-Kontrolllampe leuchtet. Die
Programm-Kontrolllampe (B) blinkt wei-
terhin.
5. Drücken Sie die Programmwahltaste er-
neut, die Programmende-Kontrolllampe
erlischt. Die akustischen Signale sind
deaktiviert.
6. Schalten Sie das Gerät zur Bestätigung
aus.
Aktivierung der akustischen Signale:
1. Zur erneuten Aktivierung der akusti-
schen Signale führen Sie die Schritte (1)
bis (4) durch. Die Programm-Kontroll-
lampe (A) erlischt, und die Programmen-
de-Kontrolllampe ist deaktiviert. Die Pro-
52 progress
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Progress PV1535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Progress PV1535 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info