Manual Progress PK1203 (page 20 of 48) (English, German, Dutch, French)

638735

Zoom out

Zoom in

1/48

Problem Possible cause Solution

The temperature in the appli-

ance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower temperature.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' tem-

perature is too high.

Let the food products tempera-

ture decrease to room temper-

ature before storage.

Many food products are

stored at the same time.

Store less food products at the

same time.

The door has been opened

often.

Open the door only if necessa-

ry.

There is no cold air circula-

tion in the appliance.

Make sure that there is cold air

circulation in the appliance.

If the advice does not lead to

the desired result, contact the

nearest Authorised Service

Centre.

Replacing the lamp

CAUTION! Disconnect the plug

from the mains socket.

1. At the same time, with the fingers

expand up and down the transparent

cover and unhook it in the direction of

the arrows.

2. Replace the lamp with one of the same

power and shape, specifically designed

for household appliances. (the

maximum power is shown on the light

bulb cover).

3. Reassemble the lamp cover.

4. Connect the plug to the mains socket.

5. Open the door.

Make sure that the light comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

If necessary, replace the defective door

gaskets. Contact the Authorised

Service Centre.

20 Progress

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Progress PK1203 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Progress PK1203 Manual

Product: