Manual Progress PI3550 (page 80 of 92) (English, German, Dutch, French)

490726

Zoom out

Zoom in

1/92

the Multitab indicator light comes on. This

means that the function is active.

To deactivate the function press the same

buttons again until the indicator light corre-

sponding to the Multitab function symbol

goes off.

If the drying results are not satisfac-

tory we suggest that you:

1. Fill up the rinse aid dispenser with

rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position

• The activation/deactivation of the

rinse aid is only possible with the Mul-

titab function active.

Activation/deactivation of the rinse aid

dispenser

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C, until the lights of func-

tion buttons A , B, and C start flashing.

3. Press function button B, the lights of

function buttons A and C go off while the

light of function button B continues to

flash.

4. To activate the rinse aid dispenser, press

button B again, the End indicator light

comes on, indicating that the rinse aid

dispenser has been activated.

5. To memorize the operation, switch off the

dishwasher by pressing the On/Off but-

ton.

6. To deactivate the rinse aid dispenser

again, follow the above instructions until

the End indicator light goes off.

If you decide to revert back to the

use of individual detergents we ad-

vise that you:

1. Deactivate the Multi-tab function.

2. Fill up the salt container and the rinse

aid dispenser again.

3. Adjust the water hardness setting to

the highest setting and perform 1

normal washing programme without

loading any dishes.

4. Adjust the water hardness setting

according to the hardness of the wa-

ter in your area.

5. Adjust the rinse aid dosage.

Select and start a washing programme

Select the washing programme with

the door slightly opened. The start of

the programme will occur only after

the closure of the door. Until then it

is possible to modify the settings

1. Check that the baskets have been loaded

correctly and that the spray arms are free

to rotate.

2. Check that the water tap is opened.

3. Press the On/Off button. The dishwasher

must be in setting mode.

4. Press the button corresponding to the re-

quired programme (see ''Washing pro-

grammes'' chart).

When a programme has been selected

the corresponding light comes on.

The phase indicator lights foreseen for

the set programme start flashing.

Close the dishwasher door, the pro-

gramme starts automatically.

Once the programme starts, the phase

indicator lights go off except for the indi-

cator light of the phase in progress which

will remain on with a static light.

Setting and starting the programme with

delay start

1. After having selected the washing pro-

gramme, press the delay start button until

the light corresponding to the chosen

hours flashes (3h, 6h or 9h).

2. Close the dishwasher door, the count-

down starts automatically.

3. The countdown will decrease with steps

of 3 hours.

4. The opening of the door will interrupt the

countdown. Close the door; the count-

down will continue from the point at

which it was interrupted.

5. Once the delay start has elapsed the pro-

gramme will start automatically.

Once the countdown of the delay start

has elapsed, the washing programme

will start automatically.

80 progress

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Progress PI3550 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Progress PI3550 Manual

Product: