Manual Progress PI1535 (page 24 of 64) (English, German, Dutch, French)

490725

Zoom out

Zoom in

1/64

USE OF DETERGENT AND RINSE AID

Use of detergent

To help the environment, do not use

more than the correct quantity of deter-

gent.

Follow the detergent manufacturer rec-

ommendations on the detergent pack-

aging.

Do these steps to fill the detergent dispens-

er:

Press the release button

to open the

lid

of the detergent dispenser.

Put the detergent in the dispenser

3. If the washing programme has a pre-

wash phase, put a small quantity of de-

tergent in the prewash detergent com-

partment

4. If you use the detergent tablets, put the

tablet in the detergent dispenser

5. Close the detergent dispenser. Press

the lid until it locks into position.

Different brands of detergent dissolve

in different times. Some detergent tab-

lets do not have the best cleaning re-

sults during short washing pro-

grammes. Use long washing pro-

grammes when you use the detergent

tablets to fully remove the detergent.

Use of rinse aid

Rinse aid makes it possible to dry the

dishes without streaks and stains.

The rinse aid dispenser automatically

adds rinse aid during the last rinsing

phase.

Do these steps to fill the rinse aid dispens-

er:

1. To open the rinse aid dispenser, turn

the cap

counterclockwise

Fill the rinse aid dispenser

with rinse

aid. The mark 'max' shows the maxi-

mum level.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam during the washing programme.

4. To close the rinse aid dispenser, put

the cap in position and turn it clock-

wise.

Fill the rinse aid dispenser when the in-

dicator

becomes clear.

Adjust the rinse aid dosage

Factory set: position 3.

You can set the rinse aid dosage between

position 1 (lowest dosage) and position 4

(highest dosage).

Turn the rinse aid selector

to increase or

decrease the dosage.

Using combi detergent tablets

These tablets contain agents as detergent,

rinse aid and dishwasher salt. Some types

of tablets can contain other agents.

When you use tablets, that contain salt and

rinse aid, do not fill the salt container and

rinse aid dispenser.

Be sure that these tablets are applicable for

the water hardness in your area (refer to the

instructions on the packaging of the prod-

ucts).

1. Adjust the water hardness to the lowest

level. Refer to 'Setting the water soften-

er'.

2. Set the rinse aid dosage to the lowest

position. Refer to 'Use of detergent and

rinse aid'.

Using again separately detergent, salt

and rinse aid

1. Fill the salt container and the rinse aid

dispenser.

2. Adjust the water hardness to the highest

level.

24 progress

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Progress PI1535 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Progress PI1535 Manual

Product: