126180

Progress pi 1530 x Manual

75
Zoom out
Zoom in
Previous page
1/88
Next page
2. Adjust the water hardness setting to the
highest setting and perform 1 normal
washing programme without loading any
dishes.
3. Adjust the water hardness setting ac-
cording to the hardness of the water in
your area.
4. Adjust the rinse aid dosage.
Select and start a washing programme
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate
2. Check that the water tap is opened
3. Close the dishwasher door.
4. Turn the knob until the desired pro-
gramme symbol corresponds with On/
Off indicator light on the control panel.
(see "Washing programmes" chart).
– The On/Off indicator light comes on.
– The indicator lights of the phases fore-
seen for the programme start flashing.
5. Press the start/cancel button. The pro-
gramme starts automatically and the
start/cancel indicator light comes on.
– As soon as the programme starts, the
phase indicator lights go off except for
the indicator light for the phase in pro-
gress which will remain on with a static
light.
During the running of the programme, it
is not possible to change the selection
made by turning the knob in corre-
spondence of another programme or
the Off position. If you want to change
the running programme you must cancel
the selection made (see "Cancel a wash-
ing programme in progress").
The washing programme will begin only
after having pressed the start/cancel
button. Until that moment it is possible
to modify the selection made.
Select and start a washing programme
with delay start
Allows the start of the washing programme
to be delayed by 3 hours.
1. Select a washing programme.
2. Press the delay start button. The delay
start indicator light comes on.
3. Press the start/cancel button, the count-
down of the delay start begins automati-
cally. The phase indicator lights go off.
Once the delay start countdown has elapsed
the washing programme will automatically
start.
• Delay start indicator light goes off.
• Indicator light of the running phase comes
on.
Opening the door will interrupt the
countdown. Once the door is closed the
countdown will continue from the point
at which it was interrupted
Cancel a delay start in progress
1. Press the start/cancel button for about 5
seconds.
– Start/cancel and delay start indicator
lights go off.
– Phase indicator lights start flashing.
2. Press start/cancel button to start the se-
lected washing programme.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress
Open the dishwasher door; the programme
will stop. Close the door; the programme will
start from the point at which it was interrup-
ted.
Cancel a washing programme in
progress
•Press the start/cancel button for about 5
seconds. The start/cancel indicator light
goes off and the phase indicator lights are
flashing. The running programme has
been cancelled and it is now possible to
set a new washing programme or switch
off the machine. If a new washing pro-
gramme is to be selected, check that there
is detergent in the detergent dispenser.
End of the washing programme
• The dishwasher will automatically stop.
•The End indicator light comes on.
progress 75
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Progress pi 1530 x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Progress pi 1530 x in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info