638774
13
Zoom out
Zoom in
Previous page
1/44
Next page
If you touch or while
you set the DURATION, the
appliance switches to the
setting of the END function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display. The
appliance deactivates.
7. Touch a sensor field or open the oven
door to stop the acoustic signal.
8. Deactivate the appliance.
Setting the END
1.
Activate the appliance and set an oven
function and temperature.
2.
Touch again and again until the
display shows
.
flashes in the display.
3.
Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic signal
sounds for two minutes.
symbol and the
time setting flash in the display. The
appliance deactivates.
4. Touch a sensor field or open the oven
door to stop the acoustic signal.
5. Deactivate the appliance.
Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a programme)
and temperature (refer to "Setting the
oven function" and "Changing the
temperature").
2. Set the DURATION (refer to "Setting the
DURATION").
3. Touch again and again until
flashes in the display.
4. Touch to set the SET+GO function.
The display shows and with an
indicator. This indicator shows which clock
function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation of
the oven. You can set the MINUTE MINDER
at any time and also when the appliance is
off.
1.
Touch
.
and "00" flash in the display.
2. Use or to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3. Touch or the MINUTE MINDER
starts automatically after five seconds.
When the set time ends, an acoustic signal
sounds for two minutes and 00:00 and
flash in the display.
4. Touch a sensor field or open the oven
door to stop the acoustic signal.
Setting the Time delay function
The DURATION and END can be
used at the same time, if the appliance is to
be switched on and off automatically later.
In this case, first set the DURATION and
then the END
function (refer to "Setting
the DURATION" and "Setting the END" ).
When the Time delay function is
activated, the display shows a
static symbol of the oven
function,
with a dot and .
The dot shows which clock
function is on in the Clock /
residual heat display.
AUTOMATIC PROGRAMMES
WARNING! Refer to Safety
chapters.
Use an automatic programme or recipe
when you do not have the knowledge or
Progress 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Progress PCD46100X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Progress PCD46100X in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Progress PCD46100X

Progress PCD46100X User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info