Filters should be replaced at least twice a year or when they become visibly soiled.
Always operate the cleaner with filters installed to avoid reduced suction.
Disconnect from electrical outlet before changing the filters.
Cleaning the cartridge filter
Always operate the cleaner with the cartridge filter installed.
ØOpen the top cover (fig. 19).
ØRemove the dust container from the cleaner (fig. 20).
ØRemove the filter set from the dust container by taking it as indicated in the icon (fig. 21).
ØRemove the cartridge filter by turning it counter - clockwise (A) and pull it out (B) as indicated in the icon (fig. 23).
ØRinse it under tap water (fig. 24).
ØAir dry for approximately 24 hours, to ensure it is completely dry before reusing. Avoid direct sunlight and extreme drying circumstances (hair-dryer,etc.)(fig.25).
ØInsert the cartridge filter into its place (B) and turn it clockwise (A) as indicated in the icon (fig. 23).
ØPut the filter set back into the dust container (fig. 21). Put the dust container back into the cleaner (fig. 20).
ØClose the top cover (fig. 19).
Cartridge filter reference number: 407 135 652/3.
Cleaning the motor filters
Motorfilter ‘A’
ØOpen the top cover (fig. 19).
ØRemove the dust container from the cleaner (fig. 20).
ØRemove the filter set from the dust container by taking it as indicated in the icon (fig. 21).
ØRemove the cartridge filter by turning it counter - clockwise (A) and pull it out (B) as indicated in the icon (fig. 23).
ØRemove the filter from its place (fig. 26).
ØRinse it under tap water and dry it completely (fig. 28).
ØPut the filter back into its place (fig. 26).
ØInsert the cartridge filter into its place (B) and turn it clockwise (A) as indicated in the icon. (fig. 23).
ØPut the filter set back into the dust container (fig. 21).
ØPut the dust container back into the cleaner (fig. 20).
ØClose the top cover (fig. 19).
Motorfilter ‘B’
ØOpen the top cover (fig. 19).
ØRemove the filter from its place (fig. 27).
ØRinse it under tap water and dry it completely (fig. 28).
ØPut the filter back into its place (fig. 27). Close the top cover (fig. 19).
Motorfilter reference number: Menalux D24.
Cleaning/replacing the exhaust filter
PC7220, PC7260, PC7280:
ØOpen the filter grill to remove the exhaust filter (fig. 29).
ØTake the filter out of the grill (fig. 30).
ØRinse it under tap water and dry it completely (fig. 28).
ØPut the filter back into the grill (fig. 30). Close the filter grill (fig. 29).
ØAttempt to recycle packaging material and old appliances.
ØThe cardboard packaging can be placed in the waste paper collection.
ØDeposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling.
ØDeposit the polystyrene foam at the PS collection point for recycling.
Recycling the Appliance at the end of its life
ØThe plastic components all carry a material identification marking so that, like the other materials, they can recycled at the end of the life of the appli-
ance.
ØPlease inquire with your local authority.
Blocked air flow and dirty filters
ØThe cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt.
ØDisconnect from mains and allow the cleaner to cool for 20-30 minutes. Remove blockage and/or clean filters.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Progress pc7280 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Progress pc7280 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 3,43 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
