331151
39
Zoom out
Zoom in
Previous page
1/84
Next page
Installing the door and the glass panel
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels
back in the correct sequence. The second
panel has a decorative frame. The screen-
printing zone must face the inner side of
the door. Make sure that after the installa-
tion the surface of the glass panel frame on
the screen-printing zones is not rough
when you touch it.
Make sure that you install the middle panel
of glass in the seats correctly (refer to the il-
lustration).
WHAT TO DO IF…
Warning! Refer to "Safety information"
chapter.
Problem Possible cause Remedy
The oven does not heat up. The appliance is deactivated. Activate the appliance.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are not
set.
Make sure that the settings are
correct.
The oven does not heat up. The automatic switch-off is on. Refer to "Automatic switch-off".
The oven does not heat up. The Child Lock is on. Refer to "Deactivating the Child
Lock".
The oven does not heat up. The fuse in the fuse box is re-
leased.
Do a check of the fuse. If the fuse
is released more than one time,
contact a qualified electrician.
The oven lamp does not op-
erate.
The oven lamp is defective. Replace the oven lamp.
The oven does not heat up.
The fan does not operate.
The display shows
or
.
The demo mode is activated. 1. Deactivate the appliance.
2.
Press and hold the button
for approximately two sec-
onds. An acoustic signal
sounds.
3.
Press and hold the buttons
and at the same time until
the acoustic signal sounds
again and the indicator goes
out.
The display shows an error
code that is not on this list.
There is an electronic fault. 1. Deactivate the appliance with
the house fuse or the safety
switch in the fuse box and acti-
vate it again.
2. If the display shows the error
code again, contact the serv-
ice centre.
progress 39
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Progress pbp 5360 x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Progress pbp 5360 x in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info