331010
77
Zoom out
Zoom in
Previous page
1/80
Next page
77 progress
Installation and connection must
be done in compliance with the
regulations in force. Any
interventions must be carried out
when the appliance is switched
off. Only qualified service
engineers may repair the
appliance
The manufacturing company
disclaims any liability if the safety
measures are not observed.
Connecting to the electrical supply
Before connecting to the electrical sup-
ply, please make sure:
- The fuse and the domestic electrical in-
stallation must be designed for the max.
load of the appliance (see rating plate).
- The domestic electrical installation must
be equipped with a proper earth con-
nection in accordance with the regula-
tions in force.
- The socket or the multi-pole off switch
must be easy to access after the appli-
ance has been installed.
This appliance is supplied with a con-
nection cable incorporating a standard plug,
suitable for the total electric load shown on
the rating plate. The plug is to be inserted
into a suitable wall socket.
The following types of mains cable are
suitable, taking the necessary rated cross
section into account:
H07RN-F, H05RN-F, H05RR-F, H05VV-
F, H05V2V2-F (T90), H05BB-F.
If the appliance is connected without a
plug, or if the plug is not accessible, a multi-
pole off switch (e.g. fuses, circuit breaker)
with a minimum gap of 3 mm between the
contacts must be installed between the ap-
pliance and mains cable. The switch must
not interrupt the earth wire at any point. The
yellow-green earth wire should be 2-3 cm
longer than all other cables.
The connection cable must always be
laid out so that at no point does it reach
50°C (over room temperature).
After the connection has been carried
out, the heating elements must be tested by
being operated for about 3 minutes.
Terminal block
The oven is fitted with an easily
accessible terminal block which is designed
to operate with a single-phase power supply
of 230 V.
Instructions for the Installer
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Progress pbp 5320 x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Progress pbp 5320 x in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info