Manual Progress pbp 5320 x (page 73 of 80) (English, Dutch)

331010

Zoom out

Zoom in

1/80

73 progress

Fig. 32

Fig. 33

Clean the oven door with lukewarm water

and a soft cloth. Do not use products such as

scouring pads, steel wool, abrasive sponges

or acids because they could damage the

special heat-reflecting surface of the internal

panes of glass.

After cleaning, reassemble the panes in

the door and then the oven door, following the

procedure described above in reverse. Make

sure you reposition the panes correctly.

To perform this operation correctly,

proceed as follows:

a) the decorated middle pane with a frame

on the 4 sides must be reassembled so

that the screen-printing is facing outwards.

The side of the pane of glass is correct if

you do not feel any roughness near the

screen printing when you pass your fingers

over the surface.

The middle pane of glass must be put

back into the right seats as shown in Fig.

32.

b) the uppermost pane must be reassembled

as shown in Fig. 33.

After the panes of glass have been

reassembled in the oven door, perform the

procedure described in point 8. in reverse to

ensure they are locked.

Never clean the oven door when

it is warm as the panels might

shatter. If you can see scratches

or cracks in the glass panel, call

your nearest service centre

immediately to have the panel

replaced.

Models in stainless steel or aluminium:

Clean the oven door and operating panel

in stainless steel or aluminium with a damp

sponge and then dry carefully with a soft

cloth. Never use metal pads, metal wool,

acids or abrasives for cleaning because they

may scratch the surfaces.

)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Progress pbp 5320 x in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Progress pbp 5320 x Manual

Product: