Manual Progress pbp 5320 x (page 69 of 80) (English, Dutch)

331010

Zoom out

Zoom in

1/80

69 progress

To programme the pyrolytic cleaning

cycle (delayed start, automatic stop)

If you desire, you can programme the

starting and ending time of the pyrolytic

cleaning cycle.

1. Use the button to switch on the oven.

Press the button

as often as

necessary, until the Pyro function symbol

(level 1 - P I) appears in the display.

Simultaneously the “Pyro indicator and

the symbol

will flash in the

display and an acoustic signal will be

emitted. This means that, before

activating the pyrolytic cleaning function,

you have to remove all the oven

accessories and the side rails from the

oven cavity (see the previous chapter).

2. The Cooking Time symbol

will flash

for some seconds; during this time push

the button ‘ ’ or ‘ ’ to select the

pyrolytic 1 (P I) or pyrolytic 2 (P 2) function.

3. Once you have chosen the desired

pyrolytic function, Pyro will flash in the

display waiting for confirmation to start

the pyrolytic cleaning function.

At this time, push the time function button

(Fig. 23). “The End of Cooking”

symbol

and the arrow symbol

flash. On the control panel, the cleaning

cycle (that is, the actual time + cooking

time) will displayed.

Press the ‘ ’ or ‘ ’ buttons to select the

required end of cycle time (Fig. 23). After

a few seconds, the word Pyro and the

symbol

will stop flashing, the

acoustic signal will stop while the

Cooking time symbol

will flash until

the pyrolytic cleaning cycle starts.

Fig. 23

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Progress pbp 5320 x in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Progress pbp 5320 x Manual

Product: