755468
6
Zoom out
Zoom in
Previous page
1/11
Next page
STEP 3: Place the Ice Cream Maker power unit onto the fast-freezing bowl; it should sit
neatly with the tabs slotting into the corresponding wells on the rim.
STEP 4: Twist the transparent lid in a clockwise direction and lock it into place.
Using the Ice Cream Maker
STEP 1: Approx. 8 hours before making the ice cream, place the fast-freezing bowl into
the freezer to chill. Make sure the temperature is set to -18 °C or below.
STEP 2: Prepare the ice cream mixture and place it in the fridge to cool.
STEP 3: Once the fast-freezing bowl has chilled to the required temperature, remove it
from the freezer and place it onto a at, stable surface at a height that is comfortable for
the user.
STEP 4: Pour the ice cream mixture into the fast-freezing bowl, leaving a 4 cm gap
between the mixture and the rim.
STEP 5: Assemble the Ice Cream Maker following the instructions in the section entitled
‘Assembling the Ice Cream Maker’.
STEP 6: Plug in and switch on the Ice Cream Maker at the mains power supply.
STEP 7: Turn on the Ice Cream Maker using the on/off switch. Allow between 30 and
45 minutes for the mixture to thicken.
STEP 8: Once the desired consistency is achieved, turn off the Ice Cream Maker using the
on/off switch. Unplug it from the mains power supply and remove the transparent lid.
STEP 9: Place the fast-freezing bowl into the freezer until ready to serve.
Hints and Tips
1. The freezer should be set to a temperature of at least -18 °C when placing the
fast-freezing bowl into the freezer to chill.
2. Refrigerate the ice cream or sorbet mixture beforehand to aid the ice cream
making process.
3. Do not shake, puncture or heat the fast-freezing bowl, as this could cause damage.
4. Do not add alcohol to the ice cream mixture, as this will prevent the mixture
from freezing.
Storage
Check that the Ice Cream Maker power unit is cool, clean and dry before storing in a cool,
dry place.
Never wrap the cord tightly around the Ice Cream Maker; wrap it loosely to avoid
causing damage.
Store the fast-freezing bowl in the freezer at all times so that it is always ready to use.
Specications
Product code: EK4390PVDEEU7
Input: 220–240 V ~ 50Hz
Output: 12 W
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Progress EK4390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Progress EK4390 in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Progress EK4390

Progress EK4390 User Manual - German - 11 pages

Progress EK4390 User Manual - Dutch - 10 pages

Progress EK4390 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info