5146
20
Zoom out
Zoom in
Previous page
1/32
Next page
message or in case you have not activa-
ted the Voice Mail, after 5 rings this LED
will flash anyway.
As soon as you lift the handset of this
TX-250, the LED will go OFF so it is
recommendable to first dial the number
of your Voice Mail and listen if someone
left a message for you.
MEMORIES
The TX-250 has an internal memory with
the following specifications:
A: 3 one-touch memories for frequently
dialed numbers or alarm-numbers
B: 10 two-touch memories
C: 70 phonebook memories for tele-
phone numbers with name. This
memory is linked to the Caller-ID; if
the Caller-ID receives a call with a
number which is stored in this
memory, the display will show the
matching name.
PROGRAMMING
one-tounch and two-touch memories
1. leave the handset on the craddle and
press and release button
2. key in the telephone number on the
keyboard
3. press again
4. press one of the three memory
buttons (M1, M2 or M3) or one of the
keys (0-9) on the keyboard
5. repeat steps 1 to 4 for the other
memory positions
phonebook memories
1. leave the handset on the cradle
2. press and hold button
3. press , the display shows “ADD >>”
now release the buttons
4. press
, the text “ADD >>” dis-
appears, now key-in the telephone-
number
5. as soon as the number is program-
med, press button
and keep it
pressed until the cursor starts to flash
in the lower left corner
7. input the name, using the keyboard-
buttons; e.g. press 3x key -5- to
get the “L” (
= back, = next)
8. as soon as the name is programmed,
press and hold until the name and
number disappears and the cursor
starts to flash on the right side of the
display
9. program the next name/number or
press
to end the procedure
DIALING:
one-tounch and two-touch memories
1. pick up the handset or press button
and wait for the dialtone
2. press one of the three memory
buttons (M1, M2 or M3) or press
button M followed by one of the keys
(0-9) on the keyboard
3. the programmed number will auto-
matically be dialed
phonebook memories:
1. leave the handset on the cradle
2. press and hold button
3. press , the display shows “ADD”
you may now release these buttons
4. press Δ the display shows “REVIEW”
5. use and to look for the name /
number to be dialed
6. lift the handset or press button
7. the number will be dialed
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profoon TX250cw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profoon TX250cw in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Profoon TX250cw

Profoon TX250cw User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info