44
15 POSSIBLE PROBLEMS AND SOLUTIONS
15.1 POSSIBLE PROBLEMS AND SOLUTIONS
• No dialling tone.
− The outside line is being used by another unit. Wait until that call
has ended and try again.
− Check the connection between the base and you telephone
socket (when in doubt, connect a different phone to your
telephone socket).
• The power supply is interrupted.
− Check whether the adaptor below at the rear of the base is
plugged in and that the power adaptor is connected with a wall
socket.
15.2 PROBLEMS WITH INCOMING CALLS:
• No notification of incoming calls:
− The bell is disabled; enable it.
− Check the connection between the phone and your telephone
socket (when in doubt, connect a different phone to your tele-
phone socket)
• You are continuously busy:
− Check whether you have a 2nd telephone with the receiver next to
it.
− Check whether another handset registered on your telephone is
keeping the line busy.
− Connect another phone to your phone connection, and use this to
check whether the malfunction originates from your connection or
your carrier.
• Handset switches itself off when it starts ringing:
− The batteries cannot supply power for the ringtone. Clean the bat-
tery contacts or replace the batteries.
