791935

Profitech RTU5024 Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
-5-
For
example:
In NO the country code is 0047,or+47 .
The user cell phone number is 91234567 and has been assigned as the first user number, the simcard number
in the panel is 91234566 .
Problem
1:
Relay
action
but
the
first
user
haven’t
received
the
SMS
.
Solution:
Please plus the country code while you setup the 91234567 as the first user number, means setup
004791234567 to instead of the 91234567 .
Problem
2:
The
user
number
can
receive
the
Relay
action
message
from
the
RTU
5024,
but
the
RTU
5024
can
not
receive
the
commands
from
the
first
user
number.
Solution:
Please add country code to the simcard number in the RTU 5024. Means send sms commands to
004791234566 to instead of 91234566 .
Solution
3:
When you use cell phone dial another one, what number it will be di splayed then you can set the
displayed number as dial numbers; when you use cell phone send SMS to another cell phone, what number it will
be displayed then you can set the displayed number as the first user number, just use the 00 to replace the “+”,
also, you can try the “+”.
2. All the settings are through SMS commands, please edit the below SMS commands in your cell
phone, then send to the RTU5024 Unit. The unit cannot support PIN Code Protected SIMCard.
3. You can program the GSM Gate Opener with SMS commands using your phone. It is safe to do
so because in addition to the fact that other people may not know the number of the SIM
inserted in it, we also use a Password that makes it impossible for anybody, who doesn't know it,
to access the system by chance.
4. The relay output will change the close or open status by every call in, please note it. Means the
first time call it, it will close the relay to switch on the lock, if the second call in is in the setting
time, then the unit will ignore the setting time, and open the relay, to switch off the lock or
machine.
5. Remember that commands must be CAPITAL Lock LETTERS .ItisPWDnotpwd,CAPnotCap
etc. Don't add spaces or any other character.
6. The pwd in the commands is means the password, when you use it, please in stand of it bythe
digital number; the capital letters PWD is the command letter, use PWD directly.
7. If you use this model for gate open, you only need to change the password andsetupthe
authorized numbers
8. In some GSM operators they use different SMS parameter; the units can’t return the SMS
confirmation is normally. It is not product problem. Also, you can try to add the country code
before the number, see the below settings:
9. Please write down the Authorized number list in a paper for review in further.
10. If you want to reset the RTU5024 to factory default, then please send pwd#RESET# （The unit will
reply to Reset Success! Please Reboot your Device ) or When the RTU5024 works normally, you
can always press the RESET key beside the SIMCard for several seconds until the RUN Led always
is ON.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profitech RTU5024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profitech RTU5024 in the language / languages: English as an attachment in your email.

The manual is 0.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Profitech RTU5024

Profitech RTU5024 User Manual - English - 12 pages

Profitech RTU5024 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info