566815

Profile PSE-710 Manual

8
Zoom out
Zoom in
Previous page
1/13
Next page
WIRELESS MONITOR EN - 1
PSE-710
We thank you for the purchase of this Profile product. Note: It is
important that you read this manual carefully before using the
product. Then keep this manual in a safe place.
Parts (fig. 1)
1. antenna
2. 7-inch LCD screen
3. menu
4. function key – volume control
5. function key – volume control
6. function selection key
7. alarm OFF
8. on/off key
9. alarm LED
13. input adapter
14. loudspeaker
Technical specifications
Frequency: 2.4GHz
4 channels
7-inch LCD screen
Video input/output: composite video
Audio: mono
Power: 12V DC 1A
Operating temperature: 0°C – 40°C
Receiving range: 30 to 50m depending on the type and
number of obstacles between the camera and the monitor.
Installation of the monitor
First remove the protective plastic from the screen. This
extends the working life of the LCD screen.
Fig. 2: Plug the adapter into a plug socket and connect the
adapter to the monitor.
Switch the monitor on.
Switch the 2.4 GHz wireless camera on. This automatically
makes a connection with the monitor.
picture Settings
Brightness (fig. 5)
o press MENU
o select using the ‘brightness’ function keys
o press SELECT
o set the desired brightness using the function keys
o press SELECT again to confirm your choice
o after a few seconds the menu will disappear
Contrast (fig. 6)
o press MENU
o select using the ‘contrast’ function keys
o press SELECT
o set the desired contrast using the function keys
o press SELECT again to confirm your choice
o after a few seconds the menu will disappear
Saturation (fig. 7)
o press MENU
o select using the ‘saturation’ function keys
o press SELECT
o set the desired saturation using the function keys
o press SELECT again to confirm your choice
o after a few seconds the menu will disappear
Channel settings
Up to 4 channels (=4 cameras) can be activated. The
pictures from the active cameras will then alternately appear
on the screen. The speed at which the picture jumps to
another camera can be set.
Channel settings (fig. 8)
o press MENU
o select using the ‘channel’ function keys
o press SELECT
o using the function keys and the SELECT button
select the desired channels for the active cameras.
o after a few seconds the menu will disappear
Setting the picture change speed (fig. 9)
o press MENU
o select ‘switch time’ using the function keys
o press SELECT
o use the function keys and the SELECT button to set
the desired speed (4 or 8 seconds)
o after a few seconds the menu will disappear
Alarm & Volume settings
CAUTION: this function cannot be used in combination
with the Profile wireless camera systems. With other
models the alarm will only work when your camera is
compatible with this monitor function.
When the alarm has been activated a signal will sound if a
movement is detected.
(Fig 10)
press MENU
select ‘alarm’ using the function keys
press SELECT
activate or deactivate the alarm using the function keys
and the SELECT key.
press SELECT again to confirm your choice
after a few seconds the menu will disappear
Setting the alarm time (fig. 11)
o press MENU
o select ‘alarm’ using the function keys’
o press SELECT
o activate the desired duration of the alarm using the
function keys
o press SELECT again to confirm your choice
o after a few seconds the menu will disappear
Volume (fig. 12)
o set the desired volume using the function keys
o after a few seconds the menu will disappear
Troubleshooting
If the signal is weak or if there are failures on the screen try
the following solutions:
change the channel of both the monitor and the
camera.
try changing the picture settings to PAL or NTSC:
o PAL: switch the monitor off. Switch the monitor back
on by pressing the function key (up arrow) and the
on/off key at the same time. The monitor is now
working in PAL mode.
o NTSC: switch the monitor off. Switch the monitor
back on by pressing the function key (down arrow)
and the on/off key at the same time. The monitor is
now working in NTSC mode.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profile PSE-710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profile PSE-710 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info