Manual Profile PSE-507 (page 21 of 25) (English, German, Dutch, French)

566821

Zoom out

Zoom in

1/25

INSTALLATION OF YOUR SMOKE DETECTOR

Remove the mounting bracket by turning it anticlockwise

(to the left). This bracket must be assembled on the ceiling.

Use a pencil to mark the drill holes through the mounting

bracket on your ceiling. Drill the holes and insert the plugs

if necessary.

Take the battery out of the compartment and remove the

plastic cover. Insert the battery in the detector.

TIP: check the detector for correct operation. Press the test

button on the top of the detector for several seconds. If

the detector sounds a loud signal it is working perfectly. Fit

the batteries correctly. If they are not inserted correctly the

product cannot work or there is a risk of explosion (with

lithium batteries).

Fit the smoke detector on the bottom plate and turn it

clockwise (to the right).

CAUTION: a smoke detector without battery CANNOT be fit-

ted on the bottom plate.

Screw the bottom plate tight on the ceiling. Make sure that

the bottom plate is tight against the ceiling so no air can

circulate above the smoke detector and impede smoke

detection. If necessary seal this opening with mastic.

566025001_PSE507_IM_V2.indd 21 23-9-2014 12:01:01

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Profile PSE-507 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Profile PSE-507 Manual

Product: