566857
3
Zoom out
Zoom in
Previous page
1/4
Next page
HALOGEN HAND LAMP 500W + camera
EN - 3
PLI-126
2. Setting the correct frequency.
To prevent picture flicker you must set the correct
frequency of the supply, being. 50Hz or 60Hz. This is
done when the camera is in TEST MODE. Repeatedly
press the MODE button until the correct frequency
appears on the screen, 50Hz for Europe.
Press the SET button to confirm. “DONE” now appears
on the display.
Then press SET to leave the menu.
To leave TEST MODE press SET + MODE together.
3. Setting the recording selection, time and interval.
You can set an interval beforehand before a next photo
is taken. You then avoid the camera taking a number of
photos of the same person.
Press the MODE button for 2 seconds to change the
camera settings.
Then repeatedly press the MODE button until “TO-05”
flashes. “to” stands for time out” and “05 stands for
the number of minutes. Press the SET button to
change the time interval to max. 60.
Press MODE to confirm and go to the next setting, the
resolution.
4. Setting the resolution
Repeatedly press the MODE button until the asterisks
flash. Choose 1 asterisk if you want low resolution
pictures (1.3 mpx), choose 3 asterisks for high
resolution pictures (2.0 mpx).
Press SET to confirm. “DONE” now appears on the
display. You are now at the next setting, photo or
video.
5. Setting photographs or video pictures
Repeatedly press the MODE button until
or flashes.
means that 1 photo is taken when the PIR
detects movement.
Means that 2 photos are taken when the PIR
detects movement.
Means that filming takes place for 10 seconds
when the PIR detects movement.
Press SET to confirm and go to the next setting,
halogen lighting.
6. Setting the halogen lighting.
Repeatedly press the MODE button until Auto” or
“OFF” flashes.
Auto The halogen hand lamp will
automatically start working when the
camera sensor detects movement,
also when the set light intensity (LUX)
has not yet been reached.
OFF The halogen hand lamp will only start working
when the camera sensor detects movement
and the set light intensity (LUX) has been
reached.
Press SET to confirm and go to the next setting,
camera settings.
7. Leaving camera settings.
Repeatedly press the MODE button until ESC”
flashes.
Press SET to confirm.
“DONE” now appears on the display. The camera
now counts down 60 seconds. The settings then
apply.
Deleting saved pictures
Press SET and MODE once together. On the display
the word “Test” appears”. The camera is now in
TEST MODE.
Repeatedly press the MODE button until the
following icons are visible:
or
Press the SET button to confirm.
Press the SET button again until “ESC” appears on
the screen.
To leave the menu and save the settings press SET
+ MODE again together.
Viewing driver settings and pictures
The software CD-ROM supplied with the halogen
hand lamp is only compatible with PC, not with MAC.
After the installation of the CD-ROM you can view
the saved pictures.
The pictures in the built-in memory can be put on
your PC with the USB cable supplied.
You can view the pictures on your SD card on your
PC through the input provided.
Maintenance
Only use a dry, soft cloth for cleaning the halogen
hand lamp. And make sure that the lamp has first
cooled down.
Never immerse the lamp in water.
Maintenance and repairs may only be carried out by
technicians who are familiar with any applicable
regulations.
Safety instructions
The importer accepts no responsibility for damage
claims with respect to objects or persons that result
from incorrect use or non-compliance with the safety
instructions. All damage claims in such cases will be
declared null and void.
When replacing the halogen bulb the lamp must first
have cooled before the bulb is replaced. Also
disconnect the power supply. Do not exceed the
maximum wattage of 500W.
NOTE
: Never touch the bulb with your fingers.
Touching the bulb with your fingers can reduce the
life of the bulb.
Always replace cracked or broken glass by glass
with the same properties as the original glass.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profile PLI-126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profile PLI-126 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Profile PLI-126

Profile PLI-126 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info