Manual Profile PAC-354 Andante (page 6 of 13) (English, German, Dutch, French, Italian, Spanish)

566745

Zoom out

Zoom in

1/13

ANDANTE – Cordless doorbel set UK - 1

PAC-354

Thank you for purchasing this Profile product.

Please note: It is important that you read this

manual before using the product. And be sure to

save this manual for possible use later.

The cordless doorbell consists of 2 separate

components:

1. Push-button unit (transmitter)

2. Bell unit (receiver)

These items are completely independent of each

other and require no wiring.

When the push-button is pressed in, a signal is sent

to the bell, whereupon the bell is activated. Since it

has a range of up to 100 meters (in open spaces)

you can use the bell virtually anywhere in the

house, workshop, office, set it up in the garden or

just carry it with you.

Battery installation

Push-button unit

1. The push-button unit works using 1 x 12v

battery (included).

2. The battery is already installed.

3. To replace the battery (fig 1):

1. Open up the push-button unit.

2. Place a 12v battery in the battery

compartment, making sure the

positive terminal (+) is uppermost.

Bell unit

1. Slide the rear cover open.

2. Place 2 AA alkaline batteries into the

battery compartment.

3. Slide the cover firmly back into place; the

bell is now ready for use.

Installation

Push-button unit (fig 2)

Use the two small holes on the rear of the push-

button to mark the position for securing in place.

Drill small holes and mount the push-button in

position with screws (included) or use the double-

sided adhesive tape (included).

Important: If you secure the push-button onto a

metal upper surface or PVC type of door (with

metal), its maximum range of transmission will be

greatly reduced.

Bell unit

This bell can be used as a portable device - or fixed

into position. On the reverse side, there is a

suspension slot, with which the bell can be hung up

using a screw, and can easily be taken down again.

Drill a small hole and fix a rawl plug in place and

add the screw. The bell unit can hung up safely in

this way.

Choice of bell tone

The bell-tone selector button is inside the push-

button unit and bell unit (fig 3 & 4). Press the

button once to hear the bell tone already set. Press

again to hear and select the next tune.

Channel selection

The unit is supplied with a pre-set radio frequency.

Warning

1. Do not fasten the push-button onto a metal

upper surface or PVC type of door. This

restricts their range.

2. Do not expose the bell unit to direct rain,

splashing water or direct sunlight, and do not

immerse the unit in water.

3. Do not drop the bell or push-button, or

subject them to severe insults.

4. Do not expose either unit to high

temperatures, nor place them close to

sources of heat.

5. Never combine different types of batteries,

nor use old and new batteries together.

6. Always use alkaline batteries: they will last

longer and there is less risk of leakage.

7. If the bell will be out of use for a prolonged

period, remove the batteries.

8. The bell unit is suitable for use indoors only.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Profile PAC-354 Andante in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Profile PAC-354 Andante Manual

Product: