730587
16
Zoom out
Zoom in
Previous page
1/21
Next page
Stand Fan EN - 3
282010002
WARNINGS
Never place the fan near flammable liquids and units operating on gas.
Make sure that the fan cannot come into contact with water or other liquids, this can lead to the
risk of electric shock.
Do not insert objects or fingers in the rotating fins of the unit. Protect your children from this danger.
Never try to repair the unit yourself. All interventions that are performed by an unauthorised person
could be dangerous; the warranty will be void in this case. Also the replacement of the power cord
needs to be performed by a qualified electrician
Use this unit only inside and operate it according to these instructions. Do not use the unit for other
purposes.
Do not use the unit outside and always place it in a dry environment.
Check the power cord from time to time. Never use the power cord, plug or appliance when they
are damaged.
Unplug the fan from the outlet before moving the fan.
Unplug the fan before cleaning the fan.
Make sure the fan is on a flat and stable surface during operation so that it cannot fall over.
Never use an extension cord.
Do not use chemical products to clean the fan.
Make sure that children are supervised by an adult when they are near a working fan.
ASSEMBLY
Place the weight for the base (18) under the base (17) and make sure that the openings match.
Place the stem (15) on the base (17)
Insert the screws (16) in the openings in the stem (15) and base (17)
Turn the unit upside down making sure that the screws (16) do not fall out and turn the nuts (19)
on the ends of the screws (16). Firmly tighten the screws (16).
Turn the adjustable ring (14) of the stem (15) and slide the decorative plate (12) over the stem.
Then fit the adjustable ring (14) on the stem (15) again.
Pull the adjustable stem (13) out to the required height and again tighten the adjustable ring (14).
Turn the screw (11) and place the fan head on the adjustable stem (13). Tighten the screw (11)
again.
Turn (clockwise) the fastening ring of the fan blade (2) off the pin of the motor (7)
Turn (anticlockwise) the fastening ring of the back of the safety grate (5) loose from the pin of the
motor (7)
Place the back of the safety grate (6) on the pin of the motor (7), making sure that the handle is
facing upwards and that the 2 fastening pins (A-B) fit in the vertical slots of the safety grate (6).
Tighten the fastening ring (5) (clockwise).
Place the fan blade (4) on the pin of the motor and tighten using the fastening ring (2)
(anticlockwise)
Remove the safety screw (3) from the ring (20) and place the ring (20) on the back of the safety
grate (6)
Place the front side of the safety grate (1) on the back (6) so the ring (20) can hold both parts
together. Insert the safety screw (3)
OPERATION
The airflow can be directed up or down by carefully moving the fan head up or down.
To make the fan head swivel or put it in a fixed position use the swivel button, it is operated by
pulling it out or pushing it in.
The height of the fan can be adjusted by loosening the adjustment (14) ring at the bottom of the
stand and gently sliding the fan up or down. Then tighten the ring again.
You can set the speed of the fan with the speed buttons:
0 = off / 1 = low / 2 = medium / 3 = high
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profile 282010002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profile 282010002 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Profile 282010002

Profile 282010002 User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info