685734
35
Zoom out
Zoom in
Previous page
1/58
Next page
35
PC-WKS1123_IM_new 17.01.17
Switching on / off
Switching on:
Press the toggle switch downwards. The indicator light in
the switch lights up.
Switching off:
Press the toggle switch upwards. The indicator light in the
switch goes off.
Use
NOTE:
Always use fresh water.
1. Place the appliance on a at surface.
2. Press the button in the handle to open the kettle.
3. Then ll in the water (max. 0.8 Litre). You can read the
lling level on the water level indicator of the kettle.
4. Close the lid. Press down on the contact area (2) to close
the lid.
5. Place the kettle ush on the base.
6. Only connect the appliance to a properly installed safety
socket.
7. Switch on the kettle by pressing the switch. The control
lamp in the switch will light up.
Pausing / Terminating Operation
There are two options to interrupt the boiling process or to
terminate it:
1. The appliance will shut off automatically after the boiling
process. The indicator lamp will go out.
2. Push the rocker switch upwards to nish operation.
CAUTION:
Do not remove the appliance from the base without shutting
it off rst
The contacts on the base are not suitable for disconnecting
the power supply.
WARNING: Danger of scalding!
When pouring the water out, keep the lid closed.
During operation the housing becomes hot. Do not
touch it and allow the device to cool down before storing
it away.
Disconnect the power cord.
Emptying the water container.
Mains Cable Take-Up Device
The mains cable can be wound up on the base.
Cleaning
WARNING:
Always turn the device off before cleaning it and remove the
mains plug. Wait until the device has cooled down.
Never immerse the device or the base in water or other liquids.
Otherwise this might result in an electric shock or re.
CAUTION:
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents
Clean the perforated area of the spout from the inside
with a nylon brush.
Rinse the water container out with clean water. Then dry
it off with a cloth.
Clean the housing after use with a slightly damp cloth.
Decalcication
The frequency of the decalcifying operation depends on
the hardness of the water and on how often the appliance
is used.
If the appliance switches off before the water boils, it prob-
ably needs to be decalcied.
Please do not use vinegar but a commercially available
decalcication agent on the basis of citric acid. Only use
the quantities stated in the instructions.
NOTE:
After descaling the device boil fresh water in it several
times (approximately 3 - 4 times) in order to remove any
residues. Do not consume this water.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook WKS 1123 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook WKS 1123 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info