814422
9
Zoom out
Zoom in
Previous page
1/38
Next page
PC-WKS1243_IM 28.07.22
9
Programmes
Select the desired programme with the button.
Function Display Indicator
Heating +
keeping warm
M 1 50 °C
(ashes 5 minutes)
WARM (ashes
10 seconds)
Heating +
keeping warm
M 2 70 °C
(ashes 5 minutes)
WARM (ashes
10 seconds)
Heating +
keeping warm
M 3 80 °C
(ashes 5 minutes)
WARM (ashes
10 seconds)
Cooking BOIL ashes for approx. 150 seconds
Preparation
Before using the appliance for the rst time, boil it 3 times
with fresh water. Use only clear water without additives.
Use
1. Place the appliance on a at surface.
2. Press the button on the handle to open the kettle.
3. Fill in clear water through the ller opening (maximum
1.7 litres). You can read the ll level on the water level
indicator inside the appliance.
- Always use fresh, cold water.
- The water level must be between the MIN and MAX
marks.
4. Close the lid. Always make sure that the lid is rmly
closed.
5. Place the kettle ush on the base.
Operation
Quick Start:
6. Press the button. The water is heated to 100 °C.
Programme Selection:
7. Select a desired programme with the button.
8. Start the programme with the button. The selected
programme lights up permanently.
- When the temperature is reached, a signal sounds.
- The WARM indicator in the display lights up. The ap-
pliance now keeps the temperature stable for 1 hour.
Interrupting / Ending Operation
There are two ways to interrupt or end the cooking process:
1. The appliance switches off automatically after the cook-
ing process.
2. To end or interrupt the cooking process prematurely,
press the button.
- Always switch off the appliance before removing
it from the base! The contacts on the base are not
suitable for disconnecting the power supply.
Unplug the mains plug from the socket.
Empty the water container.
- Only hold the appliance by the handle.
- Keep the lid closed when pouring out.
- Open the lid only with the button on the handle.
- Close the lid by only touching the contact area.
The appliance becomes hot during operation, do not
touch it and allow the appliance to cool down before
putting it away.
Cleaning
WARNING:
Always switch off the appliance and disconnect the mains plug
from the socket before cleaning. Wait until the appliance has
cooled down.
Do not immerse the appliance or the base in water or other liq-
uids. It could cause an electric shock or re.
CAUTION:
Do not use a wire brush or other abrasive objects.
Do not use sharp or abrasive cleaning agents.
Clean the perforated area of the spout from the inside
with a nylon brush.
Rinse the water reservoir with clean water. Dry it with a
cloth.
Clean the housing with a slightly damp cloth after use.
Descaling
The intervals for descaling depend on the hardness of
the water and the frequency of use.
If the appliance switches off before the water boils,
descaling is necessary.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-WKS 1243 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-WKS 1243 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info