814417
37
Zoom out
Zoom in
Previous page
1/62
Next page
PC-WKS1192_IM 19.11.19
37
Electrical Connection
1. Check whether the electrical voltage that you intend to
use is the same as that of the appliance. Details are to
be found on the label on the base.
2. Only connect the appliance to a properly installed safety
socket.
Switching the Appliance On / Off
Switching on:
Press the toggle switch downwards. The indicator light in
the switch lights up.
Switching off:
Press the toggle switch upwards. The indicator light in
the switch goes off.
Preparation
Before using for the rst time, boil fresh water at least three
times in the appliance. Use only water without any additives
or ingredients.
Use
NOTE:
Ensure that the lter is correctly inserted in the spout
opening.
Always use fresh water.
1. Place the appliance on a at surface.
2. Also hold the kettle by the handle and open the lid.
3. Then ll in the water (max. 1.7 Litre). You can read the
lling level on the water level indicator of the kettle.
4. Close the appliance with the lid. It must audibly click into
place.
5. Place the appliance ush onto the base.
6. Switch on the appliance. The control lamp in the switch
will light up.
NOTE:
The water temperature can be seen on the display.
Pausing / Terminating Operation
There are two options to interrupt the boiling process or to
terminate it:
1. The appliance will shut off automatically after the boiling
process. The indicator lamp will go out.
2. Press the switch upwards to interrupt the boiling process,
respectively to terminate it.
CAUTION:
Do not remove the appliance from the base without shut-
ting it off rst. The contacts on the base are not suitable
for disconnecting the power supply.
WARNING: Danger of scalding!
When pouring the water out, keep the lid closed.
During operation the housing becomes hot. Do not
touch it and allow the appliance to cool down before
storing it away.
Hot steam may escape when you open the appliance!
Remove the plug from the socket.
Emptying the water container.
Cleaning
WARNING:
Always turn the appliance off before cleaning it and remove the
mains plug. Wait until the appliance has cooled down.
Never immerse the appliance or the base in water or other liq-
uids. Otherwise this might result in an electric shock or re.
CAUTION:
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents.
Rinse the water container out with clean water. Then dry
it off with a cloth.
Clean the housing after use with a slightly damp cloth.
Filter
A permanent lter is located at the spout opening. To clean
the lter, remove it from the kettle.
Rinse the lter out under running water. Clean it with a
nylon brush if it is necessary.
Re-insert the lter. To do so, use the guides on the inside
of the kettle. The lter must click audibly into place.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-WKS 1192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-WKS 1192 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info