814415

ProfiCook PC-WKS 1190 G Manual

9
Zoom out
Zoom in
Previous page
1/42
Next page
PC-WKS1190G_IM_02.2023 24.03.23
9
Electrical Connection
1. Check that the mains voltage you want to use matches
that of the appliance. You will nd the information on the
type plate.
2. Only connect the appliance to a properly installed protec-
tive contact socket.
Switching the Appliance On / Off
• Switch on (switch position: I):
Switch on the appliance with the switch. The control
lamp lights up.
• Switching off (switch position: O):
Switch off the appliance with the switch. The control lamp
goes out.
Water Tank Lighting
The water tank lighting indicates the temperature of the
water.
Green = 0 – 50 °C
Light blue = 50 – 70 °C
Dark blue = 70 – 80 °C
Purple = 80 – 90 °C
Red = 100 °C
Preparation
Before using the appliance for the rst time, boil it 3 times
with fresh water. Use only clear water without additives.
Operation
1. Place the appliance on a at surface.
2. Close the appliance with the lid. It must audibly click into
place. Always make sure that the lid is rmly closed.
3. Fill in clear water through the ller opening (maximum
1.7 litres). You can read the ll level on the appliance’s
water level indicator.
- Always use fresh, cold water.
- The water level must be between the MIN and MAX
marks.
- You do not need to remove the lid to ll in water. There
is a self-closing ller opening in the lid. The ap opens
automatically when water pressure is applied.
4. Close the lid. Press down on the contact area to close
the lid. Always make sure that the lid is rmly closed.
5. Place the kettle ush on the base.
6. Switch on the appliance with the switch. The control
lamp lights up.
Interrupting / Ending Operation
There are two ways to interrupt or end the cooking process:
1. The appliance switches off automatically after the cook-
ing process. The control lamp goes out.
2. To end or interrupt the cooking cycle prematurely, set the
switch to the O position.
- Always switch off the appliance before removing
it from the base! The contacts on the base are not
suitable for disconnecting the power supply.
- Make sure that the appliance is switched off when you
put it back on the base!
• Unplug the mains plug from the socket.
• Empty the water container.
- Only hold the appliance by the handle.
- Keep the lid closed when pouring out.
- Open and close the lid only with the handle on the lid.
• The appliance becomes hot during operation, do not
touch it and allow the appliance to cool down before
putting it away.
Cleaning
WARNING:
• Always switch off the appliance and disconnect the mains plug
from the socket before cleaning. Wait until the appliance has
cooled down.
• Do not immerse the appliance or the base in water or other liq-
uids. It could cause an electric shock or re.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-WKS 1190 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-WKS 1190 G in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info