592075
40
Zoom out
Zoom in
Previous page
1/78
Next page
40
WARNING:
• Undernocircumstancesshouldyouimmersethedeviceinwater
forcleaningpurposes.Otherwisethismightresultinanelectric
shock or fire.
• Thebladesontheknifeblockareverysharp.Arisk of injuryex-
ists!
CAUTION:
• Donotuseawirebrushoranyabrasiveitems.
• Donotuseanyacidicorabrasivedetergents.
• Theindividualpartsarenotdishwasher-safe.
NOTE: Preliminary Cleaning
Halfllthemixingvesselwithwaterandturnthe
switch to “P”forapproximately10seconds.Then
pour out the liquid.
Forthoroughcleaning,pleaseremovethemixing
vessel.
Fitting and detaching the knife block
For this, also refer to figure A on page 3.
1. Turnthemixingvesselonitshead.
2. Use moderate force to screw off the locking
ring of the blade unit by turning it towards the
UNLOCKmarking.
3. Taketheknifeblockcarefullyoutofthemixing
vessel.
4. Remove the seal ring for cleaning.
5. Place the dry seal ring onto the glass on the
bottomoftheturnedmixingjar.
6. Place the blade unit onto the seal ring.
7. Insert the locking ring and tighten it by turning it
towardstheLOCKmarking.
8. Ensure that the knife block sits securely in posi-
tion.
CAUTION:
Onlyoperatetheapplianceifyouhaveproperly
ttedtheknifeblockwiththesealring!Otherwise
themixingvesselwillnotbesealed.
Mixing jar, lid, measuring cup, locking ring,
blade unit, and seal ring
Cleanthesepartsinabowlofhotwater.Thendry
everything before assembling the parts again.
Housing
Onlyamoderatelymoistclothshouldbeusedfor
cleaning the outside of the device.
Storage
• Cleanthedeviceasdescribed.Lettheacces-
sories dry completely.
• Youmaywindthemainscableatthebottomof
the appliance.
• Werecommendthatyoustorethedeviceinits
original packaging when it is not to be used for a
longer period.
• Alwaysstorethedeviceatawellventilatedand
dry place outside the reach of children.
Troubleshooting
Device is not working.
Remedy:
• Checkthemainsconnection.
• Checkthepositionoftherotaryswitch.
Otherpossiblecauses:
The device is fitted with a safety switch. This pre-
vents the motor from starting up unintentionally.
Remedy:
Checkthatthemixingvesselisrmlyinplace.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-UM 1086 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-UM 1086 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info