552330

ProfiCook PC-MCM 1024 Manual

60
Zoom out
Zoom in
Previous page
1/122
Next page
60
Assembly
Attach the mixing jug
Placethemixingjugontothebaseunit.Payatten-
tion to the symbols while doing so. The marking on
themixingjugbeneaththehandleandthemarking
on the base unit have to be precisely aligned one
above the other.
Put the lid on
1. Placethelidontothemixingjugsothatthelatch
with the lock is situated on the right beside the
handle.
2. Twist the lid clockwise up to the stop. The lock
mustsitsecurelyinthehandleofthemixingjug.
NOTE:
Incorrect assembly will prevent the appliance from
being operated.
Instructions for use
Electrical connection
1. Check if the mains voltage that you want to use
matches the one of the appliance. You will find
the information about this on the rating plate.
2. Onlyconnecttheappliancetoaproperly
installed earthed socket. You will hear a beep
when the appliance is assembled correctly
together with the lid.
Functionality of the appliance
• Theapplianceisoperatedeitherwiththepower
control or with the function buttons.
• Eachpushofabuttonisconrmedwithabeep,
if the appliance has been turned on with the
POWERbutton.
• Withthepowercontrolyouwillsetthemixing
speed. Always start with the lowest speed (Set-
ting1)ifthejugislledtoitsmaximumcapac-
ity. The function of the power control will be
disabled if you use a program with the function
buttons.
• Withthefunctionbuttonsyouwillbeableto
heat, cook and puree dishes. Use the HIGH,
MEDIUM,orLOWbuttonsfortheheatingfunc-
tion. You can stir the dish with the PULSE but-
ton. The cooking time can be changed at minute
intervals with the and buttons. The function
buttons will be disabled if you have turned on
the appliance with the power control.
Turning on / off
PressthePOWERbutton.Theindicatorlightwill
flash. The appliance will be in standby mode.
Turning on / off with the power control
NOTE:
The appliance can only be turned on when the
mixingjugisclosedwiththelidandwhenthe
power control is set to 0.
• Turning on: Turn the control clockwise to the
desired speed setting.
Setting 1 = low speed
Setting 2 = medium speed
Setting 3 = high speed
Setting 4 = top speed
• Turning off: Turn the control anti-clockwise to
0.
Turning on / off with the function buttons HIGH,
MEDIUM,LOW
• Turning on: Press the relevant button once.
The indicator light in the selected button will light
up.
• Turning off: Press the button once more. The
indicator light will go out. The appliance will be
instandbymode.ThenpressthePOWERbut-
ton.
Function button PULSE
As long as you keep this button pressed down, the
appliance will run at speed setting 2.
Display
The appliance has a display on which you can
read the remaining time of the cooking program in
minutes and seconds.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-MCM 1024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-MCM 1024 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info