482862

ProfiCook PC-KA 1010 Manual

37
Zoom out
Zoom in
Previous page
1/70
Next page
37
Electric Connection
1. Ensure that your mains power corresponds
with the specications of the appliance. The
specications are printed on the type label.
2. Connect the mains cable to a properly installed
and earthed 220-240 V~, 50 Hz wall outlet.
Operation
Before making coffee for the rst time operate the
appliance twice with clean water only and without
paper lter. This removes dust, which may have
collected during transport. Follow the instructions
given under “Switching on the coffee machine
directly”.
Operation
Set the time
Set hours: Simultaneously press the
SET and HOUR buttons.
Set minutes: Simultaneously press the
SET and MIN buttons.
NOTE:
• The values increase fast forward. Press and
hold the SET button and press the HOUR or
MIN button once per value to reset an indi-
vidual value.
• You exit the setting mode upon releasing the
SET button.
Preparing the Coffee Machine
1. Open the lid of the water tank.
2. Fill cold water according to the desired amount
of cups of coffee into the rear water tank. The
water level is displayed on the indicator.
NOTE:
You can use the pot to ll the water tank.
CAUTION:
Do not overll the tank! Do notll it above the
14 mark.
3. Ensure that the lter holder is properly at-
tached.
4. Turn over the lower fold of the paper lter
(size 1x4) and place it in the lter funnel. Then
ll it with coffee powder.
5. Now close the lid of the water tank.
6. Place the jug onto the warming plate.
CAUTION: DRIP STOP
Your appliance comes with a drip stop. It
closes when removing the coffee pot. This
prevents the coffee from dripping onto the
warming plate if there is still water in the lter.
• Ensure that the lid is attached to the coffee
pot. It opens the drip stop.
• If there is still water in the tank, place the
pot under-neath as soon as possible.
Otherwise the lter might overow.
Switching on the coffee machine directly:
Please follow the instructions under points “Pre-
paring the Coffee Machine”.
7. Press the ON-OFF button once. The ON-OFF
button lights up red. The appliance is opera-
tional.
NOTE:
• The unit switches itself off automatically
about 2.5 hours after the brewing. The
ON-OFF button indicator lamp turns off.
• Press the ON-OFF button once to switch
off the appliance earlier. The ON-OFF but-
ton indicator lamp turns off.
Automatic operation:
Please follow the instructions under points “Pre-
paring the Coffee Machine“.
7. Press and hold the TIMER button. Wait until
the ON-OFF button ashes blue. You are now
in programming mode. Keep the TIMER button
pressed in whilst you are setting the start time,
as described below.
8. Set start time:
Set hours: Simultaneously press the
TIMER and HOUR buttons.
Set minutes: Simultaneously press the
TIMER and MIN buttons
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-KA 1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-KA 1010 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info