552322

ProfiCook PC-HM 1026 Manual

43
Zoom out
Zoom in
Previous page
1/82
Next page
43
3. Push the blender stick (6) into the xture until
it rests completely. Lock the blender stick by
turning it counter-clockwise as far as it will go.
Disassembly of the blender stick
In order to release the blender stick from the hous-
ing, turn it clockwise and pull it off.
Instructions for use
• For best results, use high-quality containers
that are not too big.
• In order to avoid splashing, submerge the
dough hooks or beaters into the food to be
mixed before switching on the appliance.
• After switching off the appliance, wait until the
motor comes to a complete stop before remov-
ing the dough hooks or beaters from the food.
• The appliance is suitable for small quantities
only! Fill containers with the maximum quanti-
ties only as indicated in the table!
Blender stick
Cut larger size ingredients into smaller pieces (max.
Ø 1.5 cm) and add some liquid before pureeing.
CAUTION:
Do not use the blender stick for cutting hard
foodstuff such as coffee beans, nutmeg or ice
cubes. This could damage the product.
Electric operation
1. Make sure the switch (1) is at the “0” position.
2. Before you plug the mains plug into the outlet,
check whether the system voltage that you
want to use, matches the one of the appliance.
You will nd information about it on the type
plate.
3. Connect the appliance to a correctly installed
grounded outlet.
Multi-function switch and button (1)
Speed settings for dough hooks or
beaters
Appliance off
Switch position for
ejecting the dough
hooks or beaters
Blender stick
mode
Turning on/off
Using the dough hooks and beaters
• In order to switch on the appliance, set the
switch (1) to one of the positions from “1” to “5”.
• When at the “0” position, the appliance is
switched off.
Using the blender stick
1. Set the switch (1) to the blender stick symbol.
2. Slide the TURBO button (2) downwards and
hold it rmly. The appliance will start operation.
3. When releasing the button, the appliance will
stop.
4. Set the switch (1) to the “0” position.
NOTE:
• The control lamp underneath the glass cover
shows you the operating mode.
• When assembling the blender stick, a safety
switch will deactivate the speed settings.
Speed settings
Switch position 1: lowest speed setting
Switch position 5: highest speed setting
(TURBO)
Turbo operating mode
All speed settings allow you to temporarily switch
to the highest speed setting. In order to do so,
slide the TURBO button downwards during opera-
tion. When activating the button in short intervals,
you will achieve a pulse operation.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-HM 1026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-HM 1026 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info