482873

ProfiCook PC-EWB 1007 Manual

41
Zoom out
Zoom in
Previous page
1/78
Next page
41
NOTE:
• Therstfewicecubeswillbesmalldepending
on the water temperature and ambient tem-
perature. The ice cubes will only grow larger in
the following cycle.
• Forbestresults,aimforawatertemperature
ofbetween7°Cand35°Caswellasanambi-
enttemperatureofbetween15°Cand38°C.
• Duetofastfreezingtheicecubescanlook
“milky”. This is the air trapped in the water and
doesnotinuencethequalityoftheicecubes.
• Ifyouwantclearicecubes,usechilleddrink-
ing water which has firstly been boiled.
1. Refer to figure A on page 3. Pull the ice cube
tray about half way.
2. Using the supplied measuring beaker as a
guide, pour at least 0.8 l drinking water, to a
maximum of 1.8 l, into the water tank through
the ice cube tray.
NOTE:
• Youcanalsopullouttheicecubetray
completely. By doing so you pour the drinking
water directly into the water tank.
• TheMAXmarkcanbefoundonthewater
tank.
3. Closetheicecubetray.
4. Start ice cube production by touching ON on the
display. The indicator lamp
rotates. An ice
cube making cycle lasts between 6 and
18 minutes. Keep the ice cube tray closed dur-
ing ice cube making.
NOTE:
If you have activated the switch-on time be-
forehand, manual start will not function. The
appliance starts automatically with the ice cube
making.
Stop Ice Cube Production
Touch OFF on the display to stop ice cube produc-
tion.
NOTE:
• Ifyouhaveactivatedtheswitch-offtimebe-
forehand, the appliance automatically finishes
ice cube making.
• Ifoperationismanuallyinterrupted,water
which is no longer needed is fed back to the
watertank.Onlythenwilltheappliancestop.
Half-finished ice cubes remain suspended on
the cooling rods. As soon as it is sufficiently
thawed, it will fall off and drop into the ice cube
tray.
Indicator Lamp
(Ice cube tray full)
The temperature sensor stops the ice cube produc-
tion as soon as the ice cube container is full. The
indicator lamp
lights up and a beep tone
sounds.
NOTE:
When removing the ice cube tray, some water will
dripthroughtheholesontotheoor.
• Removetheicecubeswiththesuppliedice
cube scoop.
• Theindicatorlamp
turns off and a few mo-
ments later ice cube production starts again.
Indicator Lamp
(Water refill)
The indicator lamp turns on if the water tank is
nearly empty and a beep tone sounds. Ice cube
production is automatically halted.
• Emptytheicecubetray.
• Rellwithpotablewaterasdescribedinchapter
“Make ice cubes”. Since there may still be water
intheappliance,checktheMAXmarkinthe
water tank.
• Closetheicecubetray.
• TouchON on the display, to restart ice cube
production. The indicator lamp
turns off.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-EWB 1007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-EWB 1007 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info