482870

ProfiCook PC-AE 1001 Manual

35
Zoom out
Zoom in
Previous page
1/70
Next page
35
Special Safety Instructions for
this Machine
WARNING:
• Riskofcuts!Thecentrifugesieveissharp!
• Iftherotatingsieveisdamaged,thedevice
shall not be operated.
• Alwaysusethesuppliedtamper.Donotinsert
your fingers or tools into the filler opening.
• Donotoperatethemixerformorethan1min-
ute! Afterwards, let it cool for approximately
3 minutes before you use it again.
• Donottouchanymovingpartsofthemachine
and always wait for it to stop.
• Themachineshouldonlybeusedundersuper-
vision!
• Donotmanipulateanyofthesafetyswitches!
• Donotremovethelidduringoperation.
• Donotputyourngersintothelleropening.
Designated use
This appliance is intended to extract juice from fruit
and vegetables.
Do not use for too hard foodstuffs such as nuts or
chocolate.
It is intended for the use in private households and
similar applications.
It is only to be used as instructed in this user
manual. The appliance is not intended for com-
mercial use.
Any other use shall be considered as not intended
use and can lead to material damage or even
personal injury.
The manufacturer shall not be liable for damages
caused by not intended use.
Supplied parts
1 base device with motor
1 transparent cover
1 tamper
1 centrifuge sieve
1 centrifuge housing
1 pomace container
Unpacking the appliance
1. Remove the device from its packaging.
2. Remove all packaging materials like foils, filling
materials, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.
NOTE:
There may still be dust or production remains on
the device. We recommend that you clean the
device as described under “Cleaning”.
Description of the Parts
1 Tamper
2 Filler opening
3 Transparent cover
4 Safety switch
5 Centrifugal sieve
6 Centrifuge casing
7 Drive wheel
8 Safety bracket
9 Control panel
10 Base device with motor
11 Pomace container
Preparations
For assembly, also refer to the illustrations on
page 3.
1. Set the device so that the switch points towards
you.
2. Tilt the safety handle to the right.
3. Attach the pulp container on the left side. In
the next step it is secured by the collar of the
centrifuge casing.
4. Attach the centrifuge casing on top of the base
casing. The base casing has a recess. Here the
spout of the centrifuge casing must be placed.
WARNING risk of cuts! The centrifugal
sieve is sharp!
5. Place the centrifugal sieve on top of the drive
wheel. Press it down. It clicks in place on the
drive wheel.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-AE 1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-AE 1001 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info