482868
33
Zoom out
Zoom in
Previous page
1/62
Next page
33
Preparations
For assembly, also refer to the illustrations on
page 3.
1. Set the device so that the switch points to-
wards you.
2. Tilt the safety handle to the right.
3. Remove the transparent cover.
4. Attach the pomace container on the left side.
For this, hold it slightly inclined in order to insert
the upper edge into the collar of the centrifuge
housing.
5. Set the transparent cover onto the device. It
also extends to above the pomace container.
6. Lock the transparent cover with the safety
handle.
7. Attach the juice container with lid and sieve on
the right side.
8. Cut the fruit to be juiced in advance into strips.
9. Make sure that the function switch is set to “0”.
NOTE:
You have to remove the centrifuge housing and
sieve for cleaning. After cleaning, assemble the
device as shown below:
1. Set the device so that the switch points
towards you.
2. Tilt the safety handle to the right.
3. Attach the pomace container on the left side.
4. Set the centrifuge housing onto the base
housing. The arrows on the components help
you to nd the correct position.
The centrifuge housing has three feet which
t into the holes on the base housing.
Electric Connection
Before inserting the power plug into the out-
let, check that the mains voltage to be used
matches that of the device. You can nd the
required information on the nameplate.
Connect the device only to a correctly installed
safety socket for 220 240 V~ 50 Hz.
Operation
Switch settings
Select step 1 for smaller fruit like strawberries.
Select step 2 for larger pieces or hard veg-
etables, for example carrots.
Juice extraction
NOTE:
The device has a safety switch. The motor
can be switched on only when the safety
handle is closed.
The device is intended for short-time opera-
tion. Wait for 1 minute after operation for 3
minutes.
WARNING:
Before you switch on: Check again that the ac-
cessories are seated securely.
Set the switch to the desired step. The motor
starts.
Place the fruit into the ller opening and push
with the tamper.
The juice nowows into the juice container. The
pulp is collected in the pomace container.
NOTE:
The juice container has a capacity of 0.7 liters.
Stop the operation in time. The MAX marking
must not be exceeded.
Empty the pomace container periodically. In
order not to impair the performance of the
device, do not let it become too full.
Cleaning
WARNING:
Before cleaning, switch the device off and pull
the power plug.
Under no circumstances should you immerse
the device in water for cleaning purposes.
Otherwise this might result in an electric shock
orre.
The centrifuge sieve is very sharp! Danger of
injury!
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook PC-AE 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook PC-AE 1000 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info