685765

ProfiCook MS 1135 Manual

36
Zoom out
Zoom in
Previous page
1/62
Next page
36
• Do not operate the appliance on a separate timer or a separate re-
mote control system.
• This appliance is intended for use in a household and in similar ap-
plications such as
- in staff kitchens of shops, ofces and other commercial areas.
It is not designed for use
- by visitors in hotels, motels and other residential facilities;
- on agricultural property;
- in bed and breakfast type environments.
Overview of the Components
1 Cover
2 Foam tank with motor/heating unit
3 MAX marker (without foaming)
4 MAX marker (foaming)
5 MIN marker
6 Axle for stirrer
7 Cold button with blue LED
8 Reheat button with red LED
9 Power cord with power plug
10 Base
11 Steel stirrer for frothing milk
12 Stirrer for drinks without foaming
Preparation
• Remove the appliance and all included accessories
from the box.
• In order to remove any production residue, clean
all accessories before initial use as described in
“Cleaning”.
• Place the appliance on a stable, at and dry surface.
Electrical Connection
• Check if the mains voltage to be applied matches
the voltage of the appliance. Refer to the rating
label for detailed specications.
• Connect the power cord of the base (10) into a
grounded outlet.
• Place foam tank with motor/heating unit (2) onto
the base (10).
Instructions for Operation
1. Open the cover (1): Pull the cover (1) upwards
from the foam tanks (2).
2. Insertion of a stirrer: At the bottom of the tank (2)
you see the axle (6) of the stirrer (11 or12). Insert
the stirrer (11 or 12) on the axle (6) and check to
make sure it can rotate freely.
3. Filling the foam tank (2): Fill the desired quantity
of milk or a hot drink in the foam tank (2). Note the
corresponding MIN and MAX markers in the foam
tank (2) (lower MAX marker (4) for frothing milk,
upper MAX marker (3) for drinks without foam).
4. Function selection:
Function Button Stirrer
Frothing cold milk
Stirrer (11) for
frothing
Cold milk or cocoa
(without frothing)
Stirrer (12) for
cold drinks without
foaming
Frothing hot milk
Stirrer (11) for
frothing
Warm milk or hot
chocolate (without
foaming)
Stirrer (12) for
hot drinks without
foaming
5. If stirring or foaming cold drinks, the button (7) is
lit continuously while the stirrers (11 and 12) stirs
drinks or foams. After about 2 minutes, the appliance
switches off automatically and the button goes out.
6. If stirring or foaming warm drinks, the button (8) is
lit continuously while the stirrers (11 and 12) stirs
drinks or foams. After the necessary temperature of
about 65°C is reached, the appliance switches off
automatically and the button goes out.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook MS 1135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook MS 1135 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info