814453
59
Zoom out
Zoom in
Previous page
1/98
Next page
PC-KM1189_IM 23.07.19
59
WARNING:
Never immerse the appliance in water for cleaning. It could
cause an electric shock or re.
The knives in the mixing bowl and the meat grinder are sharp!
There is a risk of injury! Proceed carefully when disassem-
bling, cleaning and assembling the individual parts.
CAUTION:
Do not use wire brushes or other abrasive objects.
Do not use any sharp or abrasive cleaning agents.
Motor Housing
For cleaning of the housing, only use a damp cloth and mild
detergents.
Accessories of the Kneading Machine and
the Meat Grinder
CAUTION:
The components are not suitable for cleaning in the
dishwasher. Under the inuence of heat and strong deter-
gents, they could deform or discolour.
Components that have come into contact with food, can
be cleaned in soapy water.
Allow the parts to dry thoroughly before assembling the
appliance again.
Accessories of the Mixer
NOTE: Pre-Cleaning
Fill the mixing bowl halfway with water and turn on the
appliance for about 10 seconds. Empty out the liquid
afterwards.
WARNING: Risk of Injury!
The knives on the knife block are sharp. Be careful when
disassembling, cleaning, and assembling the individual
parts.
To clean properly, remove the mixing vessel.
Disassemble the mixing jug after each use.
Unscrew the screwon base from the mixing jug.
Remove the knife block and the seal ring from the
screw-on base.
The glass carafe of the mixing jug and the lid can be
cleaned in a warm rinsing bath. Rinse with pure water
and dry.
Allow the parts to dry thoroughly before assembling the
appliance again.
CAUTION:
Only operate the appliance if you have properly tted the
knife block with the seal ring! Otherwise the mixing vessel
will not be sealed.
Storage
Clean the appliance as described. Let the accessories
dry completely.
We recommend that you keep the appliance in the
original packaging, if you do not want to use it for a
longer period.
Always store the appliance out of reach of children in a
well ventilated, dry place.
Troubleshooting
Problem Possible Cause Solution
The
appliance
is not
working.
The appliance has
no power supply.
Check the outlet with a
different appliance.
Your appliance
is equipped with
safety switches.
They prevent
accidental starting
of the motor.
Check correct
position of
- the swivel arm (5),
- the mixing vessel
(3) or
- the safety cover (4).
Set the knob in the
position.
Then select the de-
sired speed setting.
The overheating
protection has
been activated. The
motor is too hot.
Let the appliance
cool down for at least
15 minutes before
switching it on again.
The appliance is
defect.
Consult our service de-
partment or an expert.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook KM 1189 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook KM 1189 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info