686166

ProfiCook HGA 1111 Manual

43
Zoom out
Zoom in
Previous page
1/74
Next page
43
CAUTION: Overload!
• When using extension cords, these should have a
cable cross-section of at least 1.5 mm².
• Do not use any multiple sockets, as this appliance
is too powerful.
Power On / Off
Power on:
Turn the temperature control (10) clockwise to the
desired temperature.
Switch the On / Off Switch I/O (7) to position I. The
control light in the On / Off Switch I/O (7) lights up red.
NOTE:
Depending on the ambient temperature and the
content that is being heated in the tank, differences
between the set and the actual temperature can
occur.
To turn off:
Switch the On / Off Switch I/O (7) to position O. The
control light in the On / Off Switch I/O (7) turns off.
Turn the temperature control (10) counterclockwise as
far as it will go to the position °C.
Operation
Heating and Keeping Warm:
1. Fill the appliance with the desired beverages.
Minimum lling level 3 liters.
2. Insert the mains plug (12) into the socket.
3. Before use, turn the lid (2) and lock it with the lock
mechanism of the lid (3).
4. Turn the temperature control (10) clockwise to
the desired temperature. The temperature control
(10) can variably adjust the temperature between
approx. 30°C - 100°C.
5. Switch the On / Off Switch (7) to position I. The red
Power control light (7) and the red heating control
(9) light are turned on.
6. When the set temperature is reached, the heating
control light (9) switches off and the green “keeping
warm” control light turns on; the appliance remains
in “keeping warm” state and holds the set tempera-
ture until it is switched off.
7. In order to drain liquid, pull the tap (11) up or push
it down and hold it in this position, until the cup or
tank is lled. Release the tap (11) after the tapping
process, it shuts off automatically. For a steady
ow, push the tap (11) up or down until it locks,
after overcoming a slight resistance; the tap (11)
remains open.
8. Due to the system, a residue of approx. 1.5 l of
liquid remains in the tank (1). This amount can be
reduced by cautiously tipping the tank (1) forward
while draining the liquid.
Pause Operation / End Operation:
• Switch the On / Off Switch I/O (7) to position O to
end the heating or boiling process.
• Turn the temperature control (10) counterclockwise
as far as it will go to the position °C.
WARNING: Hazard of burns!
• The housing will be hot during use, do not touch
and let the appliance cool down before storing it.
• Disconnect the mains plug (12).
Cleaning
WARNING:
• Always turn the appliance off before cleaning and disconnect the
power plug (12). Wait until the appliance has cooled.
• Never immerse the appliance into water or other liquids.
• The appliance is not suitable for cleaning with a jet of water. There-
fore, do not clean this appliance with a pressure water jet!
• Clean the appliance regularly.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook HGA 1111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook HGA 1111 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info