814454
39
Zoom out
Zoom in
Previous page
1/66
Next page
PC-FW1172_IM 17.12.18
39
Assembly of the Meat Grinder
NOTE:
The design of the perforated disks represents a rmly
connected unit. This should not be loosened under any
circumstances.
Please also observe our illustrations under “A” (Page 4).
Please follow points 1 to 4 as described under “Prepa-
ration”.
5. Insert the knife with the sharpened edge outwards onto
the shaft of the scroll.
6. Select a perforated disc (10). Use the recesses to do so.
7. Rotate the catch clockwise.
More details can be found under “Electrical connection” &
“Operation”.
Assembly of the Sausage Attachment
Please also observe our illustrations under “B” (Page 4).
First proceed as described under “Preparation” and
“Assembly of the Meat Grinder”, points 1 to 6.
7. Position the sausage attachment on the spiral housing.
8. Rotate the catch clockwise.
More details can be found under “Electrical connection” &
“Operation”.
Mounting of the “Kebbe” Attachment
Please also observe our illustrations under “C” (Page 4).
Please follow points 1 to 4 as described under “Prepa-
ration”.
5. Position the 2-piece Kebbe attachment on the shaft of
the spiral. Use the recesses to do so.
6. Rotate the catch clockwise.
More details can be found under “Electrical connection” &
“Operation”.
Electrical Connection
1. Check whether the mains voltage that you want to use,
corresponds with that of the appliance. You will nd the
information about it on the rating plate.
2. Ensure that the function switch is set to ” (Off).
3. Only connect the appliance to a properly installed safety
socket.
Switch Functions
Function Switch ON / R (On / Return)
Use the switch (3) to select the desired operating mode for
the switch (2).
Switch ON / / R (Forward / Off / Return)
The appliance is equipped with a forward and return
function. If the scroll should block, you can use the return
function, in order to release it.
-Forward
Turn the switch (3) to “ON”.
Turn the switch (2) to “ON”. The appliance is in the
“Forward” mode.
-Return
Turn the switch (2) to “ nd wait until the motor
stops.
Turn the switch (3) to “R”. Press “R” on the switch (2).
The appliance will be in the “Return” mode as long as
you keep the switch pressed down.
-Switching Off
Move the switch (2) to “ ” and pull the power plug.
Operation
WARNING: Risk of injury!
Always use the supplied tamper. Never insert your ngers
or tools into the lling neck!
CAUTION:
Do not use the appliance for longer than 10 continuous
minutes. Let it cool for 10 minutes before using it again.
1. Put the pieces of meat (meat paste / sausage mass or
dough) on the lling tray and into the ller neck.
2. Stuff, if necessary, the meat respectively the dough with
the tamper (7).
Ending Operation
1. Disconnect the power plug.
2. Disassemble all parts of the meat grinder.
3. Clean the parts used as described under “Cleaning”.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook FW 1172 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook FW 1172 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info