686167

ProfiCook DR 1116 Manual

41
Zoom out
Zoom in
Previous page
1/70
Next page
41
PC-DR1116_IM_K4 25.07.16
Operation of the Appliance
Location
• Place the machine on the dry, non-slip surface.
• Take care that the appliance and the mains cable
never are placed onto hot surfaces or near heat
sources (e.g. range, hob).
Assembly
• If you want to use only one sieve tray, please use
the one with the closed air duct. You see the inscrip-
tion “COUVERCLE TOP TAPA SUPERIOR”.
• If you use several sieve trays, the sieve tray with
the closed air duct needs to be placed in the upper
position.
• Use the appliance only with the lid closed.
Electric Connection
Before inserting the power plug into the outlet, check
that the mains voltage to be used matches that of the
appliance. You can nd the required information on the
nameplate.
Use
1. Connect the appliance to a tested socket. The
appliance is in standby mode. The display will show
“Hr” for “hours” and the number of hours “00” ash.
2. Press the TIME / TEMP button. You will see the
preset temperature “55 °C”.
NOTE:
If you want to change the temperature unit to “°F”
change, hold the TIME / TEMP button pressed
down for about 3 seconds. This change is only
possible in standby mode.
3. Press the button “
” or “ “ to set the desired
temperature. With each press on the button, the
temperature increases or decreases by 5 °.
4. Press TIME/TEMP. The display will ash “00”.
5. Press the button “
” or “ “ to set the desired
dehydrating time. With each press on the button,
the time increases or decreases by 1 hour. If you
hold the button “ ” or “ “ pressed, a fast mode
will start.
6. Press the START/PAUSE button to switch on the
appliance. In the display, you will see the symbol .
NOTE:
• During operation, the remaining time and the
set temperature are alternately indicated in the
display.
• To interrupt the operation, press once briey
the START / PAUSE button. The display will
ash "PA". If you want to continue the opera-
tion, press again the button START / PAUSE.
• You can change the temperature or the dehy-
drating time at any time during operation by
using the TIME / TEMP button. But please note:
Once you increase or decrease the time, the
full-hour countdown will start from the begin-
ning. The minutes during which the appliance
has already been in operating mode will not be
considered.
Stop Operation
• When the set time has elapsed in the timer, the
appliance automatically switches to standby mode.
The heating and the fan will stop. The display will
show “00”.
• You can also previously cancel the operation at
any time. Hold the START / PAUSE button pressed
down for about 3 seconds.
• Disconnect the mains plug from the socket.
Cleaning
WARNING:
• Always remove the mains lead before cleaning!
• Wait until the machine has cooled down completely!
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ProfiCook DR 1116 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ProfiCook DR 1116 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info