814799

Proficare LR 3083 Manual

50
Zoom out
Zoom in
Previous page
1/86
Next page
PC-LR3083_IM_new2_14.01.2021 14.01.21
50
Time-delayed Switch-off
You can set a time-controlled switch-off for the appliance.
NOTE:
This is only possible when the appliance is switched on.
• Use the TIME button to select a time setting between
and .
• Upon expiry of the timer, the appliance will switch off
automatically.
Child Lock
Press and hold the 3s
3s
button for about 3 seconds to acti-
vate or deactivate the child lock. This prevents the operation
of the appliance. CHILD LOCK lights up in the display
when the childproof lock is activated.
Ionizing Function
The electronic ionization of the air causes dust particles to
become electrostatically charged. As a result, they combine
to form larger particles and thus get caught by the HEPA
lter in a more reliable manner.
• Press the ANION button to activate or deactivate the
ionization function.
NOTE:
If the ionization function is activated, the ANION button
lights up on the control panel.
Cleaning / Maintenance
WARNING:
• Switch off the appliance before cleaning and maintenance. Dis-
connect the power adapter from the electrical outlet.
• Never immerse the motor housing in water for cleaning. It could
result in an electric shock or re.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.
• Clean the motor housing with a dry cloth, without
additives.
You can moisten the cloth slightly to wipe away extreme
soiling.
• If the FILTER REPLACE button ashes, the lter has to
be cleaned or replaced.
NOTE:
Despite this message, the appliance may still be operated
with condence. After you have cleaned or replaced the
lter, press the FILTER REPLACE button for approx.
3 seconds. The lighting of the button goes out.
Cleaning the Filter Element / Replacing the Filter Element
1. Turn the appliance upside down.
2. Open the cover by unscrewing and removing it coun-
ter-clockwise.
3. Remove the lter insert. If required, you may clean the
lter element by beating it slightly or wiping it gently with
a soft brush or a damp cloth.
CAUTION:
Do not immerse the lter element in water!
Replace the lter if it is heavily soiled.
einstall the lter insert.
4. Tighten the cover clockwise. Pay attention to the
notches.
Cleaning the Sensor
NOTE:
• Only clean the sensor after the lter element has been
cleaned or replaced.
• If the sensor is the only component that is cleaned
it will become dirty very quickly. This may cause the
displayed air quality to be no longer accurate. It is
therefore necessary to always clean both the lter
element and the sensor.
1. Open the cover on the back of the appliance.
2. Clean the sensor and the rest of the area at least once
every two months. Vacuum the area with a vacuum
cleaner.
3. Close the cover again. It must audibly engage.
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proficare LR 3083 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proficare LR 3083 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info