814809
27
Zoom out
Zoom in
Previous page
1/46
Next page
PC-HTH3003_IM 06.10.17
27
NOTE:
High temperatures can arise in areas with little or no hair
between the hair-dryer hood and the skin. Select the
correct heat /blowing level.
Warm air can blow into the ears.
Oil and grease can leave traces on the hair-dryer hood.
Clean these as directed under “Cleaning”.
Hair Dryer
If you wish to dry specic sections of your hair only, attach the
styling nozzle. That will concentrate the air ow.
Round brush (Curling brush)
If you wish to style your hair curly, attach the round brush.
Comb your hair and separate it into single strands. Twist one
hair strand around the brush starting from the tips all the way
to the hairline. Keep holding the appliance in that position for
several seconds until the desired degree of drying and styling
has been achieved.
Assembly / Disassembly of Attachments
WARNING: Risk of burns!
If you want to change an attachment directly after use, let
the appliance cool down rst!
CAUTION:
The locking mechanism can break if you install or remove
the attachments in any other way than as described.
Note the guides on the basic appliance and in the attach-
ments. The attachments have an additional marking on the
outer edge.
Put on an attachment until it audibly snaps into place.
Make sure that the marking is in line with the button.
Press the button on the basic appliance in order to release
the locking. Remove the attachment.
Electrical Connection
1. Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the appli-
ance. You can nd this information on the nameplate.
2. Connect the appliance to a properly installed earthed
socket.
Use
1. After washing your hair dry it with a towel.
2. Select the desired attachment.
3. Unwind the mains cable completely.
4. Shift the switch on the handle to one of the desired heat /
blowing levels:
Level 0: Off
Level 1: Medium temperature
Level 2: High temperature
Level : Cold setting for style x
Ionizing Function – Reduction of Static in Hair
The appliance is also tted with an ionizer which gives off
negative ions with the air ow when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for a
silky nish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Switch-off
Set the bottom switch to “0” after use and disconnect from
the mains.
Storage
Leave the appliance to cool down before putting it away!
Remove the attachment.
NOTE:
Let the hair-dryer hood dry completely after use!
Stow the appliance and the attachments in the provided
storage bag.
You also have the option to hang the appliance on the
suspension eye.
Mains Cable
The mains cable should only be wound up loosely.
Never tie the cable tightly round the appliance, as over
time this may result in the cable breaking.
Check the mains cable regularly for damage.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proficare HTH 3003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proficare HTH 3003 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info