814838
33
Zoom out
Zoom in
Previous page
1/58
Next page
PC-HSM-R3013_IM 11.01.18
33
After initial use, do not charge the battery for longer than
10 hours at one time.
CAUTION:
After 10 hours always disconnect from mains power
supply.
NOTE:
You can extent the lifetime of the rechargeable battery by
following these steps:
Only charge after the battery is nearly exhausted.
Do not charge for more than 10 hours.
Charge the appliance at temperatures between 0 °
and + 40 °C.
In case the rechargeable batteries are faulty, replace
them with two new ones of the same types. Observe the
details under “Technical Data”.
Using the Appliance
Switching On and Off
Slide the switch to turn the appliance on or off.
Adjust Cutting Length
1. Turn off the appliance. “ON” can be seen on the switch.
Number Cutting length
in mm
1approx. 4
2approx. 10
3approx. 14
4approx. 18
2. Select a comb attach-
ment. The comb attach-
ments are labelled with
numbers.
3. Attach the desired
comb: Also refer to g-
ure B on page 3. Slide
the blades of the clipper
head into the jags of the comb.
4. To remove the comb attachment, pull it off the clipper
head.
Cut Hair and Beard
WARNING: Risk of injury!
Do not press the shaving head of the hair / beard trimmer
too rmly against the skin.
NOTE:
Only cut dry hair with this appliance.
Start by using the biggest comb attachment and cut
your hair / beard step by step to the desired length.
1. Select the cutting length with a comb attachment.
2. Turn the appliance so that you are able to see the back.
Set the switch (2) to the left position.
3. Switch the appliance on. “OFF” can be seen on the
switch.
Thinning out Your Hair
This appliance has a thin-out function.
Use the appliance with a comb attachment.
The different positions of the switch (2), you will be able
to produce different results.
Outlining and Shaving the Neck
Use the appliance without a comb attachment.
Set the switch (2) to the left position.
The shaving head allows for precisely outlining the
beard contours, as well as a clean shaving of the hair
line at the neck.
Finish Operation
Turn the appliance off.
Cleaning
WARNING:
Switch off the appliance before cleaning. Disconnect the power
adapter from the electrical outlet.
Do not submerge the appliance in water!
Do not immerse the power adapter in water!
CAUTION:
Also do not clean the appliance under running water!
The electronics could get damaged.
Do not use a wire brush or other abrasives.
Do not use sharp or abrasive cleaning agents.
Use the cleaning brush to remove remaining hair after
use.
Clean the casing with a slightly damp cloth, if necessary.
Always clean the power adapter with a dry cloth.
Regularly apply 1 - 2 drops acid-free oil onto the blades
of the clipper head.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proficare HSM- at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proficare HSM- in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info