814769

Proficare HL 3116 Manual

14
Zoom out
Zoom in
Previous page
1/74
Next page
PC-HL3116_IM 29.06.23
14
Operation
Switching On / Off
• Press the button to switch on the appliance. The fan
starts to operate. The control lamp FAN lights up.
• Press the button again to switch off the appliance. If
the heating mode was active, the FAN mode is activated
for 30 seconds and the air ap is closed. The appliance
then switches to standby mode.
Swivelling the Air Flap
Press the button to switch the air ap swinging on or
off. The control lamp SWING lights up when the function is
activated.
Heating Function
Press the button repeatedly to switch between the
following modes:
LOW =Low temperature and fan.
Control lamp LOW and FAN light up.
HIGH =High temperature and fan.
Control lamp HIGH and FAN light up.
FAN =Only the fan is active.
Control lamp FAN light up.
Setting the Temperature (TEMP Function)
The appliance automatically selects the heating level ac-
cording to the set temperature. As soon as the set tempera-
ture is reached, the appliance switches off the heating.
The adjustable temperature range is between 18 °C and
45 °C.
1. Press the button.
2. Set the desired temperature with the and buttons.
3. Conrm the entry with the
OK
button. The desired tem-
perature level is automatically maintained.
The control lamp TEMP lights up. This indicates that the
function is activated.
Deleting the Set Temperature
Proceed as follows to delete the previously set temperature:
1. First press the button.
2. To delete the setting, now press the C
°
°
button. The
control lamp TEMP goes out.
Timer Function
You can set the appliance to operate for a certain time.
1. Press the button repeatedly to select between one
hour ( ) and eight hours ( ). The setting ( ) disa-
bles the function.
2. After the set time has elapsed, a beep sounds and the
appliance starts a 30-second countdown. The appliance
switches to standby mode after the countdown has
elapsed.
- The activated function is not displayed for technical
reasons.
- The function cannot be selected when the weekly timer
is active.
Setting the Weekly Timer
• The weekly timer cannot be set when the appliance is in
fan mode.
• The weekly timer can also be combined with the TEMP
function, the SWING function and the “Open Window
Detection” function.
• To use the weekly timer, you must rst set the current
time. The current time must be set when the appliance
is rst put into operation and every time the appliance is
disconnected from the mains.
• The days of the week are indicated by the following digits
in the display:
=
=
=
=
Monday
Tuesday
Wednesday
Thursday
=
=
=
Friday
Saturday
Sunday
Set the Current Time:
1. Press the button. The indication (Monday) ap-
pears in the display.
2. Select the current day of the week with the or
button. Conrm the entry with the
OK
button.
3. Entering the hours:
appears in the display. The setting is made with the
/ buttons. Conrm the entry with the
OK
button.
4. Enter the Minutes:
appears in the display. The setting is made with the
/ buttons. Conrm the entry with the
OK
button.
Select the Weekly Timer:
• The appliance has pre-programmed week timers ( to
) and an individually programmable week timer ( ).
• With the weekly timer , the setting must be made for
all days of the week. Only hours can be set, not minutes.
The stop time must be after the start time.
• If the weekly timer is set in the selected mode, the appli-
ance runs until the stop time. Outside the selected mode,
the fan continues to run for 30 seconds. After that, the
appliance switches to standby mode.
• The activated function is indicated by the control lamps
24 / 7 and LOW or HIGH ashing. As soon as the appli-
ance switches on, the control lamps light up.
• The following is a list of the pre-programmed weekly
timers:
Mode Weekdays Time
Monday – Sunday 8:00 – 17:00
Monday – Sunday 18:00 – 7:00*
Monday – Friday 8:00 – 17:00
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Proficare HL 3116 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Proficare HL 3116 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info